Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Hastelloy X Tube to Female Pipes, which is non – magnetic cobalt based super – alloy, and not significantly harden able. High Strength Hastelloy X Tube Fittings has a well – documented history in pressure vessel applications particularly in Submarine hull construction. Under arduous working conditions, Hastelloy X Compression Fittings has to have excellent low cycle fatigue properties and in conjunction with a high resistance to crack propagation.
The general level of corrosion resistance in Hastelloy X Female Connector Fittings is best in the fully hardened condition, and decreases slightly as the aging temperature is increased. Hastelloy X Ferrule Fittings may also be used in the solution treated condition or heat-treated to obtain a wide variety of properties. Hastelloy X Double Ferrule Fittings is used in aerospace, aircraft components, fabricated parts in high – pressure corrosive environments including valves, shafts, fasteners, fittings and gears.
Alloy X Female Connector Tube Fittings maintains good strength up to 2150 Degree F, which requires minimum yield strength at room temperature. Alloy X Compression Tube Fittings maintains good oxidation resistance up to 1900 Degree F. Alloy X Ferrule Tube Fittings has highly resistant to hydrochloric acid, nitric acid and wet chlorine (subject to need for exercising care in its selection at certain concentrations and temperatures). Alloy X Double Ferrule Tube Fittings has a unique ability to resist corrosion in very severe environments.
Hastelloy X Tube to Female Pipes Specifications |
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – X0 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
X Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition
| Hastelloy X | Ni | C | Mo | Mn | Si | Fe | Cu | Ti | Co | Cr |
| Balance | 0.05-0.15 | 8.0-10.0 | 1.0 max | 1.0 max | 17.0-20.0 | 0.50 max | 0.15 max | 0.5-2.5 | 20.5-23.0 |
Hastelloy Alloy X Tube to Female Pipes Fitting Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| – | – | – | – | – |
Equivalent Grades for X Hastelloy Tube to Female Pipes Fitting
| STANDARD | UNS | WERKSTOFF NR. |
| Hastelloy X | N06002 | 2.4665 |
Hastelloy Alloy X Tube to Female Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Hastelloy X Tube to Female Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)