Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Carbon Steel Nipple, which has shown good formability in a variety of fabrications. It is conceivable that material thicknesses for a project may be reduced if this Carbon Steel Hexagon Reducing Nipple is used, thus reducing cost without compromising quality. We recommend a maximum hot forming temperature for our Carbon Steel Hexagon Nipple in between 2010 Degree F and 2100 Degree F (1100 Degree C to 1150 Degree C). If the shape of the work piece is not compact, the edges of this Carbon Steel One End Threaded Nipple may be significantly cooler than the bulk, and there is risk of cracking in the cooler regions.
These precautions are necessary to avoid cross contamination of our CS Both End Threaded Nipple by easily corroded metals that may discolor the surface of the fabricated product. Even when the equipment has sufficient power, allowance must be made for higher spring – back caused by the high strength of this Carbon Steel Concentric Swaged Nipple.
Sachiya Steel International is one of the pioneer dealer and exporter of our Carbon Steel Eccentric Swaged Nipple, where tooling and work surfaces must be thoroughly cleaned before use. In the solution annealed condition from about 1925 Degree F, this CS Hex Nipple has a microstructure with about 40 % ferrite – 50% ferrite. Meanwhile, the high strength of our CS Hex Reducing Nipple can pose problems.
Carbon Steel Nipple Specification |
||
| Size | : | 1/2″ TO 4″ |
| Range | : | 15 NB TO 100 NB IN 3000 LBS, 6000 LBS, 9000 LBS |
| Grade | : | ASTM / ASME A105/ A105N/ A694 |
| Class | : | 150#, 300#, 400#, 600#, 900#, 1500# & 2500# |
Carbon Steel Nipple Chemical Composition
| Element | Carbon, max | Manganese, max | Phosphorus, max | Sulfur, max |
| A105 | 0.29 % | 1.20 % | 0.04 % | 0.15 % |
CS Nipple Mechanical Properties
| Grade | Tensile, ksi | Yield, min, ksi | Elong %, min |
|---|---|---|---|
| A105 | 60 min | — | 18 |
Carbon Steel Nipple Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
CS Nipples Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)