Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Hydraulic Fittings, which is soon replaced with gilding metal to reduce metal fouling in the bore. Nickel 200 Hydraulic Type Fittings ranging in composition are commonly specified in heat exchanger or condenser tubes in a wide variety of marine applications. The successful use of Nickel 200 Forged Hydraulic Fittings in coinage is due to its corrosion resistance, electrical conductivity, durability, and malleability, and low allergy risk, eases of stamping (metalworking), antimicrobial properties and recyclability.
Single – core thermocouple cables use a single conductor pair of thermocouple conductors in Nickel 200 Hydraulic Forged Fittings such as iron – constantan, copper constantan or nickel – chromium / nickel – Aluminium. Alloy 200 Hydraulic Fittings have the heating element of constantan or nickel-chromium alloy within a sheath of nickel or stainless steel. Alloy 200 Hydraulic Type Fittings is used in cryogenic applications, where the bullet jackets were commonly made from this material.
The combination of good ductility retention and thermal conductivity of Alloy 200 Forged Hydraulic Fittings at very low temperatures is advantageous for low – temperature processing and storage equipment as well as for heat exchangers at cryogenic plants. Currently, Alloy 200 Hydraulic Forged Fittings remains the basic material for silver – plated cutlery. Alloy 200 Hydraulic Fittings is commonly used for mechanical and electrical equipment, medical equipment, zippers, jewellery items, and as material for strings for string instruments.
Nickel Alloy 200 Hydraulic Fittings Specifications |
||
| Specifications | : | ASTM B366 / ASME SB366 |
| Size | : | 1/16” to 2″ inch |
| Thread | : | NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| PTFE Standards | : | ASTM 3294, ASTM D1710 |
| Applicable temperature | : | 150-200°C |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Nickel Alloy 200 Hydraulic Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
High Nickel Alloy 200 Hydraulic Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for Alloy 200 Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
High Nickel Alloy 200 Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Nickel Alloy 200 Hydraulic Tube Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)