Sachiya Steel International is the manufacturer, exporter, and supplier of the very good quality of ASTM A210 Alloy Steel GR A1 Pipes to national and international clients. We are also the stockiest of the piping in complete range to meet the urgent requirements of the industrialists.
We offer ASTM A210 Alloy Steel GR A1 Pipes in various product specifications including sizes, surface finishes, length, dimensions, wall thickness, and end finishes. We produce the pipes by using a high quality of alloy that adds greater strength and all desired properties into it. We too consider national and international product quality standards at the time of piping fabrications. We also manufacture the pipe as per the specification given to us by our clients.
The material used for making ASTM A210 Alloy Steel GR A1 Pipe is containing several alloying elements in considerable proportions. It is having magnesium in 0.93%, sulfur in 0.035%, and silicon in 0.10%. The chemical composition of the material helps in increasing the tensile strength and yielding strength. Therefore, the grade material is used for high-temperature applications, pressure bearing applications, and low-pressure applications.
The dimensions in which we provide ASTM A210 Alloy Steel GR A1 Pipes is ASTM, API, and ASME. The schedules in which the same is supplied and exported are SCH40, SCH30, STD, SCH80, XS, and XXS and as per clients needs. The surface coating in which the piping is available is epoxy, 3LPE coating, and color paint. Its ends are plain, threaded, and beveled end.
Our ASTM A210 Alloy Steel GR A1 Pipes is widely appreciated because of amazing properties found into it. High tensile strength, high yielding strength, rugged construction, heat resistance, hold high pressure, longevity, withstand easily at high-temperature atmosphere, etc. The applications of ASTM A210 Alloy Steel GR A1 Pipes is including petrochemicals, pharmaceuticals, heat exchangers, condensers, specialty chemicals, and pulp & paper industry, and so on.
- Specifications : ASTM A210 / ASME SA210
- Dimensions : ASTM, ASME and API
- Size : 1/8″NB TO 30″NB IN
- Type : Seamless / ERW / Welded
- Length : Single Random, Double Random & Cut Length.
- Form : Round, Square, Rectangular etc
- End : Plain End, Beveled End, Treaded
| Grade | C(Max) | Mn | Si(Min) | P(Max) | S(Max) |
| ASTM A210 A1 | 0.27 | Max.0.93 | 0.1 | 0.035 | 0.035 |
| Tensile Strength, MPa | Yield Strength, MPa | Elongation |
| ≥ 415 | ≥ 255 | ≥ 30 |
| ASTM A210 Grade A1 Pipe Size NPS | Pipe O.D. | Wall Thickness | Pipe I.D. | Weight per Foot |
| 1/2 | 0.84 | 0.109 | 0.622 | 0.85 |
| 0.147 | 0.546 | 1.09 | ||
| 0.188 | 0.464 | 1.31 | ||
| 0.294 | 0.252 | 1.72 | ||
| 3/4 | 1.05 | 0.113 | 0.824 | 1.13 |
| 0.154 | 0.742 | 1.48 | ||
| 0.219 | 0.612 | 1.95 | ||
| 0.308 | 0.434 | 2.44 | ||
| 1 | 1.315 | 0.133 | 1.049 | 1.68 |
| 0.179 | 0.957 | 2.17 | ||
| 0.250 | 0.815 | 2.85 | ||
| 0.358 | 0.599 | 3.66 | ||
| 1 1/4 | 1.66 | 0.140 | 1.380 | 2.27 |
| 0.191 | 1.278 | 3.00 | ||
| 0.250 | 1.160 | 3.77 | ||
| 0.382 | 0.896 | 5.22 | ||
| 1 1/2 | 1.90 | 0.145 | 1.610 | 2.72 |
| 0.200 | 1.500 | 3.63 | ||
| 0.281 | 1.338 | 4.86 | ||
| 0.400 | 1.100 | 6.41 | ||
| 2 | 2.375 | 0.109 | 2.157 | 2.64 |
| 0.154 | 2.067 | 3.66 | ||
| 0.218 | 1.939 | 5.03 | ||
| 0.250 | 1.875 | 5.68 | ||
| 0.281 | 1.813 | 6.29 | ||
| 0.344 | 1.687 | 7.47 | ||
| 0.436 | 1.503 | 9.04 | ||
| 2 1/2 | 2.875 | 0.120 | 2.635 | 3.53 |
| 0.203 | 2.469 | 5.80 | ||
| 0.216 | 2.443 | 6.14 | ||
| 0.250 | 2.375 | 7.02 | ||
| 0.276 | 2.323 | 7.67 | ||
| 0.375 | 2.125 | 10.02 | ||
| 0.552 | 1.771 | 13.71 | ||
| 3 | 3.50 | 0.120 | 3.260 | 4.34 |
| 0.156 | 3.188 | 5.58 | ||
| 0.172 | 3.156 | 6.12 | ||
| 0.188 | 3.124 | 6.66 | ||
| 0.216 | 3.068 | 7.58 | ||
| 0.250 | 3.000 | 8.69 | ||
| 0.281 | 2.938 | 9.67 | ||
| 0.300 | 2.900 | 10.26 | ||
| 0.438 | 2.624 | 14.34 | ||
| 0.600 | 2.300 | 18.6 | ||
| 3 1/2 | 4.0 | 0.120 | 3.760 | 4.98 |
| 0.226 | 3.548 | 9.12 | ||
| 0.250 | 3.500 | 10.02 | ||
| 0.281 | 3.438 | 11.17 | ||
| 0.318 | 3.364 | 12.52 | ||
| 0.636 | 2..728 | 22.87 | ||
| 4 | 4.5 | 0.120 | 4.260 | 5.62 |
| 0.156 | 4.188 | 7.24 | ||
| 0.188 | 4.124 | 8.67 | ||
| 0.203 | 4.094 | 9.32 | ||
| 0.219 | 4.062 | 10.02 | ||
| 0.237 | 4.026 | 10.80 | ||
| 0.250 | 4.000 | 11.36 | ||
| 0.281 | 3.938 | 12.67 | ||
| 0.312 | 3.876 | 13.97 | ||
| 0.337 | 3.826 | 15.00 | ||
| 0.438 | 3.624 | 19.02 | ||
| 0.531 | 3.438 | 22.53 | ||
| 0.674 | 3.152 | 27.57 | ||
| 5 | 5.563 | 0.188 | 5.187 | 10.80 |
| 0.219 | 5.125 | 12.51 | ||
| 0.258 | 5.047 | 14.63 | ||
| 0.281 | 5.001 | 15.87 | ||
| 0.312 | 4.939 | 17.51 | ||
| 0.344 | 4.875 | 19.19 | ||
| 0.375 | 4.813 | 20.80 | ||
| 0.500 | 4.563 | 27.06 | ||
| 0.625 | 4.313 | 32.99 | ||
| 0.750 | 4.063 | 38.59 | ||
| 6 | 6.625 | 0.109 | 6.407 | 7.59 |
| 0.134 | 6.357 | 9.30 | ||
| 0.156 | 6.313 | 10.79 | ||
| 0.188 | 6.249 | 12.94 | ||
| 0.203 | 6.219 | 13.94 | ||
| 0.219 | 6.187 | 15.00 | ||
| 0.250 | 6.125 | 17.04 | ||
| 0.280 | 6.065 | 18.99 | ||
| 0.312 | 6.001 | 21.06 | ||
| 0.344 | 5.937 | 23.10 | ||
| 0.375 | 5.875 | 25.05 | ||
| 0.432 | 5.761 | 28.60 | ||
| 0.500 | 5.625 | 32.74 | ||
| 0.562 | 5.501 | 36.43 | ||
| 0.625 | 5.375 | 40.09 | ||
| 0.719 | 5.187 | 45.39 | ||
| 0.864 | 4.897 | 53.21 | ||
| 1.000 | 4.625 | 60.13 | ||
| 1.125 | 4.375 | 66.14 |
| Hot rolled | Outside Diameter, mm | Tolerance, mm |
| OD≤101.6 | +0.4/-0.8 | |
| 101.6＜OD≤190.5 | +0.4/-1.2 | |
| 190.5＜OD≤228.6 | +0.4/-1.6 | |
| Cold Drawn | Outside Diameter, mm | Tolerance, mm |
| OD＜25.4 | ±0.10 | |
| 25.4≤OD≤38.1 | ±0.15 | |
| 38.1＜OD＜50.8 | ±0.20 | |
| 50.8≤OD＜63.5 | ±0.25 | |
| 63.5≤OD＜76.2 | ±0.30 | |
| 76.2≤OD≤101.6 | ±0.38 | |
| 101.6＜OD≤190.5 | +0.38/-0.64 | |
| 190.5＜OD≤228.6 | +0.38/-1.14 | |
| NPS | Outside Diameter, inch | Tolerance, mm |
| 1/8≤OD≤1-1/2 | ±0.40 | |
| 1-1/2＜OD≤4 | ±0.79 | |
| 4＜OD≤8 | +1.59/-0.79 | |
| 8＜OD≤12 | +2.38/-0.79 | |
| OD>12 | ±1% |