Sachiya Steel International is one of the leading Manufacturer and Exporter of Stainless Steel 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels. The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres. The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F.
Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc. In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316. SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures.
Ra 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking. Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock. Ra 330 Tube Fittings has oxidation resistance to 2100 Degree F and resistant to carburization and nitriding.
Incoloy 330/SS 330/Ra 330 Tube to Male Fittings Specifications |
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Incoloy, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Sn | Pb |
| 330 | 0.08 max | 2.00 max | 0.75-1.50 | 0.03 max | 1.00 max | Balance | 34.0-37.0 | 17.0-20.0 | 0.025 | 0.005 max |
| STANDARD | WERKSTOFF NR. | UNS |
| Incoloy 330 | 1.4886 | N08330 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)