Alloy A286 Angle Manufacturer

AISI 4130 Angle Manufacturer
December 6, 2021
Aluminium Angle Manufacturer
December 7, 2021

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy A286 Angle And Other Alloy Steel Products, which is an iron – nickel – chromium alloy with additions of molybdenum and titanium. Alloy A286 Angle is designed for applications requiring high strength and good corrosion resistance at temperatures up to 704 Degree C. Alloy A286 C-Channel is age – harden able, iron – nickel – chromium super – alloy appropriate for applications that require high tensile strength, oxidation resistance and corrosion resistance. Alloy A286 Chain is a precipitation hardening, austenitic stainless steel designed for use at temperatures up to 1300 Degree F, where high tensile strength, excellent creep strength and good corrosion resistance are required.

Alloy A286 I-Beam is an age – harden able iron base super – alloy for applications requiring high strength from -320 Degree F for up to 1000 Degree F long time, 1300 Degree F – 1500 Degree F short time. Alloy A286 H-Beam is an iron – based super – alloy useful for applications requiring high strength and corrosion resistance and for lower stress applications at higher temperatures. Alloy A286 T-Beam has excellent fabrication characteristics and high mechanical properties due to age – hardenability.

Alloy A286 Angle

Alloy A286 Angle

The limiting chemical composition is excellent, where A286 Alloy Angle is austenitic in all metallurgical conditions. A286 Alloy C-Channel is designed for applications requiring high strength and good corrosion resistance. An advantage of A286 Alloy Chain is that it can be precipitation hardened and strengthened by heat treatments.

Alloy A286 Angle, Channel, Beam, Chain Specifications
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, Alloy
Alloy A286 Angle
: 5mm to 9mm
Alloy A286 Channel
: 40mm*20mm~300mm*300mm
Alloy A286 Beam : 3″ thru 12.31″
Alloy A286 Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
A286 Alloy Angle, Channel, Beam, Chain Chemical Composition
Grade Cr Ni Mo Co Va Al Ti B C Fe Mn Si P S
Alloy A286 13.5-16.0 24.0-27.0 1.0-1.5 1.0 max 0.1-0.5 0.35 max 1.9-2.35 0.003-0.01 0.08 max Bal 2.0 1.0 0.025 0.025
Alloy A286 Angle, Channel, Beam, Chain Mechanical Properties
Temperature, °F 70* 70 400 800 1000 1200 1400
Ultimate Tensile Strength, ksi 95* 145 143 138 131 103 64
0.2% Yield Strength, ksi 50* 95 93 93 87 88 62
Elongation, % 40* 24 21 18 18 13 18
Alloy A-286 Angle, Channel, Beam, Chain Physical Properties
Temperature, °F 200 800 1000 1200 1400
Coefficient of Thermal Expansion, in/in°F x 10-6 9.2 9.6 9.8 9.9 10.3
Thermal Conductivity
Btu • ft/ft2 • hr • °F
8.0 9.8 13.0 14.1
Modulus of Elasticity,
psi X 106
24 22 23
Alloy A286 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
A286 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote