Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Alloy Steel F11 Nipple, which can be cold – bent to 25 % deformation without requiring subsequent heat treatment. The oxide film in this Alloy Steel F11 Hexagon Reducing Nipple provides high resistance to erosion in high velocity process streams. The proportions of iron to chromium contents in Alloy Steel F11 Hexagon Nipple may be varied and other elements such as nickel, molybdenum, manganese and nitrogen may be added to widen the range of capabilities.
Each particular specifications of this Alloy Steel F11 One End Threaded Nipple have its own unique mechanical and physical properties and will usually be produced in accordance with an established national or international specification or standard. If high – speed steel tools are used then approximately the same cutting speed can be used as for Alloy Steel F11 Both End Threaded Nipple. Heat treatment for this Alloy Steel F11 Concentric Nipple is carried out in the form of solution – annealing or resistance annealing.
Hot bending for AS F11 Eccentric Nipple is carried out at 1100 Degree – 950 Degree C (2010 Degree F – 1740 Degree F) and should be followed by solution – annealing. Like all types of steel, this Alloy Steel F11 Hex Nipple is not a single metal but an alloy that is a material made from two or more separate elements alloyed or “melted” together.
Alloy Steel F11 Nipple |
||
| Specifications | : | ASTM A182, ASME SA 182 |
| Dimensions | : | ANSI/ASME B16.11 |
| Size | : | 1/4″ to 4″ |
| Class | : | 2000, 3000, 6000, 9000 |
Alloy Steel F11 Nipple Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo |
| Alloy Steel F11 | 0.5-0.15 | 0.3-0.6 | 0.5-1.0 | 0.03 | 0.03 | 1.0-1.5 | 0.44-0.65 |
Alloy Steel F11 Nipple Mechanical Properties
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 205 | 415 | 20 % |
Alloy Steel F11 Nipple Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Alloy Steel F11 Nipple Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)