Sachiya Steel International is a known supplier and Stockist of ASTM B165 Seamless Pipes, which will fail when used in applications beyond its design limitations. These ASTM B165 Copper Nickel Seamless Pipes is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas.
In these applications, it is advantageous to use a nickel – based alloy such as ASME SB 165 Copper Nickel Seamless Tubes due to its resistance to localized corrosion in these applications. Nickel – based alloys such as these ASTM B165 Cupro Nickel Seamless Pipes have a tendency to crater crack, so grinding of starts and stops is recommended.
Contamination by grease, oil, lead, Sulphur, or other low melting point elements in ASME SB 165 Cupro Nickel Seamless Tubes can lead to severe cracking problems. The welding surface and adjacent areas of these ASTM B165 Cu-Ni Seamless Pipes should be cleaned thoroughly with an appropriate solvent such as 99.9 % isopropanol (IPA).
Prior to any welding for ASME SB 165 Cu-Ni Seamless Tubes, all foreign matter — grease, cutting fluids, crayon markings, scale — should be removed. Solution annealing of these ASTM B165 Copper Nickel Pipes is performed at a temperature of 2150 Degree F for a time commensurate with section size. The heat – affected weld zones in ASME SB 165 Copper Nickel Tubes have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.
ASTM B165 Seamless Pipes and Tubes Specifications |
||
| Size | : | 1/2″ – 10″ / 4 to 219mm W. T.: 0.5 to 20mm |
| Thickness | : | 1mm to 20mm |
| Length | : | Within 13500mm |
| Type | : | Seamless Pipes, Seamless Tubes |
| Grades | : | Monel 400 (UNS No. N04400) |
ASTM B165 Seamless Pipes & Tubes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
ASTM B165 Pipe and Tube Test Certificates
We at GIC provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.