ASTM B729 Seamless Pipe

ASTM B729 Seamless Pipe Manufacture

 

Sachiya Steel International is a well-known firm in trading and exporting ASTM B729 Seamless Pipe, which has better resistance to sea water then Grade 316. Our ASTM B729 Nickel Pipes gives better guaranteed corrosion resistance. These ASME SB 729 Nickel Tubes is not generally suitable for use at temperatures above 300 Degree C, where the CPT is generally at least 35 Degree C.

Our ASTM B729 Nickel Alloy Pipes neither suffers from precipitation of brittle micro constituents, nor below -50 Degree C because of its ductile – to – brittle – transition. These ASME SB 729 Nickel Alloy Tubes has excellent general corrosion resistance and superior in most environments.

Our ASTM B729 Nickel Alloy Seamless Pipes has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion. Sachiya Steel International is one of the well-known suppliers and dealer of these ASME SB 729 Nickel Alloy Seamless Tubes, where the standard composition has over the years been refined by us and resulting the restricted composition range.

Our ASTM B729 Nickel Alloy Cold-Worked Pipes is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. These ASME SB 729 Nickel Alloy Cold-Worked Tubes will often perform well in environments which cause premature failure of austenitic grades. Care should be taken when cold forming these ASTM B729 Nickel Alloy Hot Finished Pipes, where it is further not optimized for cold forming or cold heading operations.

 

ASTM B729 Seamless Pipes and Tubes Specifications

Size : 6.00 mm OD up to 914.4 mm OD
Thickness : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS
Length : Within 13500mm
Type : Seamless Pipes, Seamless Tubes
Grades : UNS N08020, UNS N08024, UNS N08026

 

ASTM B729 Pipe and Tube Test Certificates

We at Sachiya Steel International  provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *