Sachiya Steel International is a known Stockist and supplier of ASTM B861 Seamless Pipes, which is also used for automotive applications. Techniques and equipment for some operations may be influenced by the strength and work – hardening rate of ASTM B861 Titanium Pipes. The rich chemistry of these ASME SB 861 Titanium Tubes makes it resistant to sour environments even at high temperatures in deep wells.
Adequate cut depth in ASTM B861 Titanium Seamless Pipes is necessary to assure avoiding contact with the previously formed work – hardened zone. These ASME SB 861 Titanium Seamless Tubes are subject to failure by sulphide stress cracking or stress corrosion cracking, which further cannot withstand this corrosive environment.
ASTM B861 Titanium Alloy Seamless Pipes is normally used in the solution – annealed condition, where this condition provides a coarse grain structure for the best creep – rupture strength. These ASME SB 861 Titanium Alloy Seamless Tubes also provides the best bend ductility at room temperature, where cooling should be by water quenching or rapid air cooling.
The best arc quality of ASTM B861 Titanium Alloy Pipes is achieved using a mixture of argon and hydrogen gases. Nitrogen gas can be substituted for hydrogen gases to make these ASME SB 861 Titanium Alloy Tubes, but the cut quality will deteriorate slightly. If ASTM B861 Ti Alloy Pipes and Tubes are used in conjunction with iron or copper piping in a system containing hydrochloric acid, the presence of these salts could cause the alloy to fail prematurely.
ASTM B861 Seamless Pipes Specifications |
||
| Size | : | 0.3mm – 10mm |
| Thickness | : | 3 to 40mm |
| Length | : | Up to 6 meters, custom cut lengths |
| Type | : | Seamless Pipe |
| Grades | : | ASTM B861 UNS R50250, ASTM B861 UNS R50400, Titanium Grade 1 Seamless Pipe, Titanium Grade 2 Seamless Pipe |
ASTM B861 Seamless Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.