Carbon Steel A694 Socket Weld Fittings Manufacture

Sachiya Steel International is a known Manufacture and exporter of Carbon Steel A694 Socket Weld Fittings, which can be welded by all the common arc welding processes. These ASTM A694 Carbon Steel Forged Socket Weld Elbow Fitting meets the tensile properties and also meets Charpy impact toughness in minimum at -50 Degree C (-58 Degree F). To obtain good impact toughness after welding, our ASME SA 694 Carbon Steel Forged Socket Weld Tee Fittings requires a higher level of impact toughness in the parent material.

Sachiya Steel International is also one of the well – known manufacturer and trader of these ASTM A694 Carbon Steel Forged Socket Weld Cap Fitting, which is usually used in the as welded condition using weld filler. Our ASME SA 694  Carbon Steel Forged Socket Weld Coupling Fittings is superior to the more expensive grades and is also superior at most concentrations. These ASTM A694 Carbon Steel Forged Socket Weld Cross Fittings also compares favorably to high silicon austenitic stainless steels in hot concentrated sulphuric acid. The iso – corrosion curves shows corrosion lines for our ASME SA 6944 Carbon Steel Forged Socket Weld Union Fittings and other alloys in dilute sulphuric and concentrated sulphuric acid. It is clear that these ASTM A694 Carbon Steel Forged Socket Weld Plug Fittings is much stronger that the austenitic alloys and it is also stronger than 22 % Cr stainless steel.

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)