Angle Archives - Sachiya Steel International Pvt. Ltd. https://sachiyasteel.com/blog/category/angle/ Pipe Fittings Manufacturers in India, Flanges, Elbows, Tee, Reducer Fri, 31 Dec 2021 08:52:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 227683958 Copper Angle Manufacturer https://sachiyasteel.com/blog/copper-angle/ https://sachiyasteel.com/blog/copper-angle/#respond Fri, 31 Dec 2021 08:52:19 +0000 https://sachiyasteel.com/blog/?p=1518 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Copper Angle And Other Copper Products, which is being offered to our clients in different designs and shapes as their requirements at reasonable cost. Pioneers in the industry, we offer Copper Angle in air conditioning copper tubes, copper tube, heat exchangers […]

The post Copper Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Copper Angle And Other Copper Products, which is being offered to our clients in different designs and shapes as their requirements at reasonable cost. Pioneers in the industry, we offer Copper Angle in air conditioning copper tubes, copper tube, heat exchangers copper tubes, copper fin tubes, solar panels copper tubes and engineering copper tubes from India. As a well-known firm in the market, we also offer Copper C-Channel in adjustable grilles, linear grill, floor grilles, non vision grilles, circular floor grill and linear air grilles.

Copper Angle
               Copper Angle

Copper Chain is precisely developed at our end keeping in mind industry laid parameters and prevailing market trends. Copper I-Beam is austenitic steel comprising of high nickel and chromium content. These elements enable this high steel alloy grade to be utilized in Sulphur containing atmospheres. Sachiya Steel International is one of the pioneers and stockiest of Copper H-Beam, which does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.

Copper T-Beam is austenitic chromium – nickel stainless steels that are often used for higher temperature applications. Copper Angle is mainly used in the wire industry that combines the high mechanical resistance of steel with the conductivity and resistance to corrosion of copper. Meanwhile, our Copper Chain is being manufactured by using high grade and excellent quality of steel.

Copper Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B62 / ASME B62
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Copper Angle
 : 5mm to 9mm
Copper Channel
 : 40mm*20mm~300mm*300mm
Copper Beam : 3″ thru 12.31″
Copper Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
Copper Angle, Channel, Beam, Chain Chemical Composition
Standard Copper NO. Chemical Composition Mechanical Properties
CU% P% Temper Tensile strength (Mpa) Elongation (%) Average Grain Size (mm)
ASTM
B280/62		 C12200 >99.9 0.015 to 0.040 >60 >205 >40 >0.040
>50 >245
Copper Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Copper Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross Copper weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy Copper
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

The post Copper Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/copper-angle/feed/ 0 1518 Brass Angle Manufacturer https://sachiyasteel.com/blog/brass-angle/ https://sachiyasteel.com/blog/brass-angle/#respond Fri, 31 Dec 2021 08:34:01 +0000 https://sachiyasteel.com/blog/?p=1515 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Angle And Other Brass Products, which contains about 40 % – 50 % ferrite in the annealed condition. This Brass Angle is a solid solution strengthened nickel super – alloy developed primarily as a filler metal for welding dissimilar alloys. […]

The post Brass Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Angle And Other Brass Products, which contains about 40 % – 50 % ferrite in the annealed condition. This Brass Angle is a solid solution strengthened nickel super – alloy developed primarily as a filler metal for welding dissimilar alloys. Our Brass C-Channel has excellent dissimilar welding characteristics, and is widely used for that purpose in the gas turbine, aerospace and chemical process industries. The properties of dissimilar weld joints made with this Brass Chain are dependent upon the base metal being joined, but are generally acceptable for a wide range of combinations.

Brass Angle
                   Brass Angle

This allows our Brass I-Beam to excel in creep and fatigue resistance at high temperatures. Our Brass H-Beam also exhibits excellent nitriding and carburization resistance comparable to that of alloy 600. This Brass T-Beam has been a practical solution to chloride stress corrosion cracking problems experienced with other alloys. The high chromium, molybdenum and nitrogen contents of our Brass Angle provide corrosion resistance superior to 300 series of stainless in most environments.

These our Brass C-Channel is not suggested for operating temperatures above 600 Degree F. Brass Chain is also known as beta and near beta alloys, which are metastable and which contain sufficient beta stabilizers (such as molybdenum, silicon and vanadium) to allow them to maintain the beta phase when quenched, and which can also be solution treated and aged to improve strength.

Brass Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B62 / ASME B62
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Brass Angle
 : 5mm to 9mm
Brass Channel
 : 40mm*20mm~300mm*300mm
Brass Beam : 3″ thru 12.31″
Brass Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
Brass Angle, Channel, Beam, Chain Chemical Composition
Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 – 2.7 35.4
Brass Angle, Channel, Beam, Chain Physical Properties
Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi
Brass Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Brass Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross Brass weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy Brass
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Brass Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/brass-angle/feed/ 0 1515 Cupro Nickel 90 Angle Manufacturer https://sachiyasteel.com/blog/cupro-nickel-90-angle/ https://sachiyasteel.com/blog/cupro-nickel-90-angle/#respond Thu, 30 Dec 2021 09:06:10 +0000 https://sachiyasteel.com/blog/?p=1510 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Angle And Other Cupro Nickel Products, which has good cold – and hot – working properties and is readily weld able. The reasons are mostly attributed to the composition and production of Cupro Nickel 90 / 10 Angle […]

The post Cupro Nickel 90 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 90 Angle And Other Cupro Nickel Products, which has good cold – and hot – working properties and is readily weld able. The reasons are mostly attributed to the composition and production of Cupro Nickel 90 / 10 Angle composites, occurrence of erosion – corrosion and corrosion damage in polluted waters. This information provides a review of the corrosion and befouling resistance of Cupro Nickel 90 / 10 Chain based on laboratory test data and documented experience of the alloy in marine environments. Cupro Nickel 90 / 10 C-Channel are used in forming wires that are typically used for low-temperature applications such as heating cables.

Cupro Nickel 90 Angle
Cupro Nickel 90 Angle

The resistance to soil erosion and abrasive fluids of Cupro Nickel 90 / 10 H-Beam is incomparable in the aqueous conditions. Cupro Nickel 90 / 10 I-Beam offers excellent resistance to stress corrosion, erosion, and befouling in seawater and brackish water, excellent fabrication and welding properties, a high resistance to hydrogen embrittlement and the retention of mechanical properties down to cryogenic temperatures.

However, the alloying elements in Cupro Nickel 90 / 10 T-Beam do not become homogenized even by repeated thermal and mechanical treatments. Cu-Ni 90 / 10 Angle ranging in composition are commonly specified in heat exchanger or condenser tubes in a wide variety of marine applications. In addition, Cu-Ni 90 / 10 Chain offers a greater strength for higher pressures.

Cupro Nickel 90/10 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B151 / ASME SB151
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Cu-Ni 90/10 Angle
 : 5mm to 9mm
Cu-Ni 90/10 Channel
 : 40mm*20mm~300mm*300mm
Cu-Ni 90/10 Beam : 3″ thru 12.31″
Cu-Ni 90/10 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
90/10 Cupro Nickel Angle, Channel, Beam, Chain Chemical Composition
Grade Cu Mn Pb Ni Fe Zn
Cu-Ni 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Equivalent Grades for 90/10 Cupro Nickel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS
Cupro Nickel 90/10 2.0872 C70600
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
90/10 Cupro Nickel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Cupro Nickel 90 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/cupro-nickel-90-angle/feed/ 0 1510 Cupro Nickel 70 Angle Manufacturer https://sachiyasteel.com/blog/cupro-nickel-70-angle/ https://sachiyasteel.com/blog/cupro-nickel-70-angle/#respond Thu, 30 Dec 2021 08:51:30 +0000 https://sachiyasteel.com/blog/?p=1507 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Angle And Other Cupro Nickel Products, which offers excellent corrosion resistance, especially in marine saltwater environments. For the sake of accuracy, Cupro Nickel 70 / 30 Angle are presented in bold type in the units in which it […]

The post Cupro Nickel 70 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Angle And Other Cupro Nickel Products, which offers excellent corrosion resistance, especially in marine saltwater environments. For the sake of accuracy, Cupro Nickel 70 / 30 Angle are presented in bold type in the units in which it was originally published with the lighter type equivalents in corresponding units. Cold Working Cu-Ni 70 / 30 Chain (UNS C71500) has good cold working capacity, where a typical mix is 75 % copper, 25 % nickel, and a trace amount of manganese. Handy architects utilize the finest quality material and propelled methods to fabricate Cupro Nickel 70 / 30 C-Channel at industry standards.

Cupro Nickel 70 Angle
Cupro Nickel 70 Angle

High conductivity (HC) electrolytically refined Copper Nickel 70 / 30 I-Beam (sometimes known as a tough pitch copper or “electro”), with a nominal conductivity of 100% IACS (International Annealed Copper Standard), is used for most electrical applications such as bus-bars, cables and windings. We are one of the well recognized manufacturers and exporters of a sturdily designed array of Cu-Ni 70 / 30 H-Beam, which are machined in sync with the industrial norms using modern machinery and excellent grade raw materials.

Hot Working Cupro Nickel 70 / 30 T-Beam is hot formed in an excellent manner, which is utilized in the different kind of business. Cu-Ni 70 / 30 Angle has excellent ductility which means that it can be easily drawn to fine wire sizes and it is available in all fabricated forms.

Cupro Nickel 70/30 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B151 / ASME SB151
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Cu-Ni 70/30 Angle
 : 5mm to 9mm
Cu-Ni 70/30 Channel
 : 40mm*20mm~300mm*300mm
Cu-Ni 70/30 Beam : 3″ thru 12.31″
Cu-Ni 70/30 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
70/30 Cupro Nickel Angle, Channel, Beam, Chain Chemical Composition
Grade Cu Mn Pb Ni Fe Zn
Cu-Ni 70/30 65 min 1.0 max 0.05 max 29-33 max 0.4-1.0 max 1 max
Cupro Nickel 70/30 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %
Equivalent Grades for 70/30 Cupro Nickel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS
Cupro Nickel 70/30 2.0882 C71500
Cupro Nickel 70/30 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
70/30 Cupro Nickel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Cupro Nickel 70 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/cupro-nickel-70-angle/feed/ 0 1507 Titanium Gr 5 Angle Manufacturer https://sachiyasteel.com/blog/titanium-gr-5-angle/ https://sachiyasteel.com/blog/titanium-gr-5-angle/#respond Wed, 29 Dec 2021 13:29:37 +0000 https://sachiyasteel.com/blog/?p=1504 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Angle And Other Titanium  Products, which can be machined using slow speeds and high feed rates. Design of experimental technique in Titanium Grade 5 Angle, that is, response surface methodology (RSM), has been used to accomplish the objective […]

The post Titanium Gr 5 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Angle And Other Titanium  Products, which can be machined using slow speeds and high feed rates. Design of experimental technique in Titanium Grade 5 Angle, that is, response surface methodology (RSM), has been used to accomplish the objective of the experimental study. Wrought Titanium Grade 5 C-Channel is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required. Titanium Grade 5 Chain is the most widely used titanium alloy of the alpha – plus – beta class, and is also the most common of all titanium alloys.

Titanium Gr 5 Angle
Titanium Gr 5 Angle

We export a wide assortment of Titanium Grade 5 I-Beam that is suitable for applications like static and rotating gas turbine engine components. The addition of 0.05 % palladium, 0.1 % ruthenium or 0.05 % palladium and 0.5 % nickel in Titanium Grade 5 H-Beam significantly increases corrosion resistance in reducing acid chloride and sour environments, raising the threshold temperature to well over 200 Degree C.

Titanium Grade 5 T-Beam is an alloyed titanium product containing 6 % Aluminum and 4 % Vanadium, and also has ELI (Extra Low Interstitial). Grade 5 Titanium Angle can be used in biomedical applications such as implantable components due to its biocompatibility, good fatigue strength and low modulus. Grade 5 Titanium Chain is produced by primary melting using vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM).

Titanium Grade 5 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B348 / ASME B348
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Titanium Gr 5 Angle
 : 5mm to 9mm
Titanium Gr 5 Channel
 : 40mm*20mm~300mm*300mm
Titanium Gr 5 Beam : 3″ thru 12.31″
Titanium Gr 5 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
Grade 5 Titanium Angle, Channel, Beam, Chain Chemical Composition
Grade C Al V O Ti Fe
Titanium Grade 5 – 6 min 4 min 0.02 max 90 min 0.25 max
Titanium Gr 2 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %
Equivalent Grades for Grade 5 Titanium Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS
Titanium Grade 5 3.7165 R56400
Titanium Grade 5 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Grade 5 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Titanium Gr 5 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/titanium-gr-5-angle/feed/ 0 1504 Titanium Gr 2 Angle Manufacturer https://sachiyasteel.com/blog/titanium-gr-2-angle/ https://sachiyasteel.com/blog/titanium-gr-2-angle/#respond Wed, 29 Dec 2021 13:14:53 +0000 https://sachiyasteel.com/blog/?p=1501 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Angle And Other Titanium Products, which is stronger than Grade 1 and equally corrosion – resistant against most applications. Titanium Grade 2 Angle is least used of the commercially pure titanium grades, but that does not make it […]

The post Titanium Gr 2 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 2 Angle And Other Titanium Products, which is stronger than Grade 1 and equally corrosion – resistant against most applications. Titanium Grade 2 Angle is least used of the commercially pure titanium grades, but that does not make it any less valuable. Titanium Grade 2 C-Channel can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F. Titanium Grade 2 Chain is not heat treatable, and is used for condensers & heat exchangers. Titanium Grade 2 I-Beam is an alpha – beta alloy, which has better response than Ti Grade 5 when heat treating to high strength levels.

Titanium Gr 2 Angle
Titanium Gr 2 Angle

The oxide scale of Titanium Grade 2 H-Beam, in turn, presents a very good protective layer, preventing bulk from oxidation. The oxidized layer of Titanium Grade 2 T-Beam provides a better protection than the use of argon or high vacuum. Grade 2 Titanium Angle has physical and mechanical properties equivalent to CP3 titanium.

The corrosion resistance of Grade 2 Titanium Chain is based on the presence of a stable, continuous, tightly adherent oxide layer. Grade 2 Titanium C-Channel also offers a higher strength – to – weight ratio and increased corrosion resistance compared to the stainless steel alloys, thus making it an attractive choice for medical applications. Grade 2 Titanium I-Beam possesses good weldability, strength, ductility and formability.

Titanium Grade 2 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B348 / ASME B348
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Titanium Gr 2 Angle
 : 5mm to 9mm
Titanium Gr 2 Channel
 : 40mm*20mm~300mm*300mm
Titanium Gr 2 Beam : 3″ thru 12.31″
Titanium Gr 2 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
Grade 2 Titanium Angle, Channel, Beam, Chain Chemical Composition
Grade C H N O Ti Fe
Titanium Grade 2 0.1 max 0.015 max 0.3 max 0.025 max 99.2 min 0.3 max
Titanium Gr 2 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 4.5 g/cm3  1665 °C (3030 °F)  Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275  20 %
Equivalent Grades for Grade 2 Titanium Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS
Titanium Grade 2 3.7035 R50400
Titanium Grade 2 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Grade 2 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Titanium Gr 2 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/titanium-gr-2-angle/feed/ 0 1501 Super Duplex S32750 Angle Manufacturer https://sachiyasteel.com/blog/super-duplex-s32750-angle/ https://sachiyasteel.com/blog/super-duplex-s32750-angle/#respond Tue, 28 Dec 2021 11:10:11 +0000 https://sachiyasteel.com/blog/?p=1498 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Super Duplex S32750 Angle And Other Super Duplex Products, which has better resistance to sea water then Grade 316. The standard composition of Super Duplex S32750 Angle has over the years been refined by us, and the resulting restricted composition range […]

The post Super Duplex S32750 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Super Duplex S32750 Angle And Other Super Duplex Products, which has better resistance to sea water then Grade 316. The standard composition of Super Duplex S32750 Angle has over the years been refined by us, and the resulting restricted composition range was endorsed. Super Duplex S32760 Angle is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation of brittle micro constituents, or below -50 Degree C because of its ductile – to – brittle – transition. Super Duplex S32750 Chain has excellent general corrosion resistance, and also superior to Grade 316 in most environments.

Super Duplex S32760 Chain has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C. Super Duplex S32750 C-Channel is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Super Duplex S32760 C-Channel will often perform well in environments which cause premature failure of austenitic grades.

Super Duplex S32750 Angle
Super Duplex S32750 Angle

Super Duplex S32750 I-Beam is versatile, general purpose stainless steels with good resistance to atmospheric corrosion, to a lot of organic and inorganic chemicals, and to foods and beverages. Super Duplex S32750 H-Beam has also been used in vacuum processing equipment and specialized instruments where high integrity is essential. For optimum corrosion resistance, forged parts of Super Duplex S32750 T-Beam should be subsequently annealed.

Super Duplex S32750/S32760 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM A276/ASME SA276
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Super Duplex S32750/S32760 Angle
 : 5mm to 9mm
Super Duplex S32750/S32760 Channel
 : 40mm*20mm~300mm*300mm
Super Duplex S32750/S32760 Beam : 3″ thru 12.31″
Super Duplex S32750/S32760 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
S32750/S32760 Super Duplex Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
 S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
 S32760 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min
Super Duplex S32750/S32760 Angle, Channel, Beam, Chain Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S32750/S32760 7.8 0.281 1350 2460
Equivalent Grades for S32750/S32760 Super Duplex Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS
Super Duplex S32750/S32760 1.4410 S32750 / S32760
SS S32750/S32760 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
S32750/S32760 Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Super Duplex S32750 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/super-duplex-s32750-angle/feed/ 0 1498 Duplex Steel S31803 Angle Manufacturer https://sachiyasteel.com/blog/duplex-steel-s31803-angle/ https://sachiyasteel.com/blog/duplex-steel-s31803-angle/#respond Tue, 28 Dec 2021 10:55:11 +0000 https://sachiyasteel.com/blog/?p=1495 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Duplex Steel S31803 Angle And Other Duplex Steel Products, where while welding, extensive heat supply should be avoided to the weld component. Duplex Steel S31803 Angle offers great resistance in the strong acidic and alkali media and prevents pitting, crevice corrosion […]

The post Duplex Steel S31803 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Duplex Steel S31803 Angle And Other Duplex Steel Products, where while welding, extensive heat supply should be avoided to the weld component. Duplex Steel S31803 Angle offers great resistance in the strong acidic and alkali media and prevents pitting, crevice corrosion and SCC. Our Duplex Steel S32205 Chain also offers wide resistance to wet chloride gas, hypochlorite and chlorine dioxide media. Duplex Steel S31803 C-Channel prevents the localized and the inter – granular corrosion in the presence of strong acids such as sulphuric acid, phosphoric acid, hydrochloric acid, nitric acid and organic acid.

Our Duplex Steel S32205 I-Beam provides excellent corrosion resistance to the entire magnitudes of sulphuric acid up to 95 Degree C or 200 Degree F. Duplex Steel S31803 H-Beam is suitable for use in the highest temperature media in FGD system and its components such as fan wheels, dampers, liquid spray and pipes. Our Duplex Steel S32205 T-Beam produced by us is valued in the diverse industrial fields such as paper.

Duplex Steel S31803 Angle
Duplex Steel S31803 Angle

The high quality Duplex Steel S31803 Chain is supplied by our highly experienced professionals with the use of advanced machinery to the customers across the world. The cut to size of our Duplex Steel S32205 Angle can be cut to size and shape by following your design needs and the whole process is exclusively monitored by our independent quality systems.

Duplex S31803/S32205 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM A276/ASME SA276
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Duplex S31803/S32205 Angle
 : 5mm to 9mm
Duplex S31803/S32205 Channel
 : 40mm*20mm~300mm*300mm
Duplex S31803/S32205 Beam : 3″ thru 12.31″
Duplex S31803/S32205 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
S31803/S32205 Duplex Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
Duplex S31803 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 22.0 – 23.0 3.0 – 3.5 4.50 – 6.50 0.14 – 0.20 63.72 min
Duplex S32205 0.030 max 2.00 max 1.00 max 0.030 max 0.020 max 21.0 – 23.0 2.5 – 3.5 4.50 – 6.50 0.8 – 0.20 63.54 min
Duplex S31803/S32205 Angle, Channel, Beam, Chain Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S31803 / S32205 7.805 0.285 1420 – 1465 2588 – 2669
Equivalent Grades for S31803/S32205 Duplex Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS
Duplex S31803/S32205 1.4462 S31803 / S32205
SS S31803/S32205 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
S31803/S32205 Steel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Duplex Steel S31803 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/duplex-steel-s31803-angle/feed/ 0 1495 Nickel Alloy 201 Angle Manufacturer https://sachiyasteel.com/blog/nickel-alloy-201-angle/ https://sachiyasteel.com/blog/nickel-alloy-201-angle/#respond Mon, 27 Dec 2021 08:18:50 +0000 https://sachiyasteel.com/blog/?p=1492 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Angle And Other Nickel Alloy Products, which is tailor-made as per the customer’s specification and end application. Nickel 201 Angle is that is alloyed with a variety of elements in total amounts between 1.0 % and 50 % […]

The post Nickel Alloy 201 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Angle And Other Nickel Alloy Products, which is tailor-made as per the customer’s specification and end application. Nickel 201 Angle is that is alloyed with a variety of elements in total amounts between 1.0 % and 50 % by weight to improve its mechanical properties. Nickel 201 Chain is trusted for their various salient features like corrosion resistance, durability and high tensile strength. Nickel 201 I-Beam is a metal alloy consisting mostly of iron, in addition to small amounts of carbon, depending on the grade and quality of the steel.

Nickel 201 H-Beam are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and Aluminium. The process of making Nickel 201 T-Beam is highly specialized and complex. Ni 201 Angle contain specified amounts of alloying elements — other than carbon and the commonly accepted amounts of manganese, copper, silicon, Sulphur, and phosphorus. Ni 201 Chain also contains niobium for stabilization against sensitization and resultants inter – granular corrosion.

Ni 201 I-Beam is any type of steel to which one or more elements besides carbon have been intentionally added, to produce a desired physical property or characteristic. Common elements that are added to make Ni 201 H-Beam are molybdenum, manganese, nickel, silicon, boron, chromium, and vanadium. Like many of the alloys in the Incoloy family, Ni 201 T-Beam offers users a number of benefits.

Nickel 201 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B160 / ASME B160
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Nickel 201 Angle
 : 5mm to 9mm
Nickel 201 Channel
 : 40mm*20mm~300mm*300mm
Nickel 201 Beam : 3″ thru 12.31″
Nickel 201 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
201 Nickel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Cu Fe Ni S
Nickel 201 0.02 max 0.35 max 0.35 max 0.25 max 0.40 max 99.00 min 0.01 max
Nickel Alloy 201 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1466 °C (2635 °F) Psi – 67,000 , MPa – 432 Psi – 21,500 , MPa – 148 45%
Equivalent Grades for 201 Nickel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS JIS GOST BS AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 НП-2 NA 18 N-100M LC-Ni 99
Nickel 201 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
201 Nickel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Nickel Alloy 201 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/nickel-alloy-201-angle/feed/ 0 1492 Nickel Alloy 200 Angle Manufacturer https://sachiyasteel.com/blog/nickel-alloy-200-angle/ https://sachiyasteel.com/blog/nickel-alloy-200-angle/#respond Mon, 27 Dec 2021 08:09:45 +0000 https://sachiyasteel.com/blog/?p=1488 Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Angle And Other Nickel Alloy Products, where brazing requires appropriate silver – base brazing alloys. A great care must be taken to ensure that there are no stresses in this Nickel 200 Angle being silver brazed, since any […]

The post Nickel Alloy 200 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Angle And Other Nickel Alloy Products, where brazing requires appropriate silver – base brazing alloys. A great care must be taken to ensure that there are no stresses in this Nickel 200 Angle being silver brazed, since any stress can cause inter – granular penetration of the brazing material, and severe stress cracking. Applications for our Nickel 200 Chain have withstood the test of time, as they are still widely used and range from seawater system piping, condensers and heat exchangers in naval vessels, commercial shipping, multiple-stage flash desalination and power stations.

This Nickel 200 I-Beam have also been used as splash zone cladding on offshore structures and protective cladding on boat hulls, as well as for solid hulls themselves. Due to its ductility, our Nickel 200 T-Beam can be readily fabricated in a wide variety of product forms and fittings. This Nickel 200 H-Beam can be readily expanded into tube sheets for the manufacturing of shell and tube heat exchangers.

Nickel Alloy 200 Angle
Nickel Alloy 200 Angle

Details of fabrication procedures for our Alloy 200 Angle includes general handling, cutting and machining, forming, heat treatment, preparing for welding, weld preparations. Thermocouples and resistors of this Alloy 200 Chain whose resistance is stable across changes in temperature contain alloy constantan, which consists of 45 % nickel. Our Alloy 200 I-Beam tends to be used as seamless tubing and expanded rather than welded into the tube plate.

Nickel 200 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B160 / ASME B160
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Nickel 200 Angle
 : 5mm to 9mm
Nickel 200 Channel
 : 40mm*20mm~300mm*300mm
Nickel 200 Beam : 3″ thru 12.31″
Nickel 200 Chain
 : 1/8 inch – 1/2 inch Diameter
Thickness
 : 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
200 Nickel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Cu Fe Ni S
Nickel 200 0.15 max 0.35  max 0.35 max 0.25 max 0.40 max 99.00 min 0.01 max
Nickel Alloy 200 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1466 °C (2635 °F) Psi – 67,000 , MPa – 432 Psi – 21,500 , MPa – 148 45%
Equivalent Grades for 200 Nickel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS JIS GOST BS AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 НП-2 NA 11 N-100M Ni 99.2
Nickel 200 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
200 Nickel Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Nickel Alloy 200 Angle Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

]]> https://sachiyasteel.com/blog/nickel-alloy-200-angle/feed/ 0 1488