Studies involving exposure of material to temperatures of 1100 Degree F to 1400 Degree F showed that although Low Temperature Carbon Steel Welded Pipes experiences increases in strength and decreased in ductility it forms no embrittling phases. Low Temperature Carbon Steel ERW Pipes is also roughly double the strength of standard austenitic stainless steels.

The standard composition of Low Temperature Carbon Steel ERW Pipes has been refined over many years, and the resulting composition range was endorsed. Low Temperature Carbon Steel Round Pipes provides excellent guaranteed corrosion resistance, but it should be noted that much of this alloy currently produced are dual conforms.

Low Temperature Carbon Steel Square Pipes is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation neither of brittle micro – constituents, nor below -50 Degree C because of its ductile – to – brittle – transition. Low Temperature Carbon Steel Rectangular Pipes are widely used in chemical, petrochemical, cellulose and nuclear plants around the world. Because of their fine austenitic – ferrite microstructure, these Low Temperature Carbon Steel Electropolish Pipes offer an excellent combination of mechanical and corrosion resistance properties.

Carbon Steel Low Temperature Seamless Pipes Packaging

Carbon Steel Low Temperature Seamless Pipes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Low Temperature Carbon Steel Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

The post Low Temperature Carbon Steel Seamless Pipes appeared first on Sachiya Steel International Pvt. Ltd..

At elevated temperatures, those elements in Carbon Steel Hexagonal Pipes cause the formation of a thin, subsurface zone of oxide particles. The zone of Carbon Steel Rectangular Pipes forms rapidly upon exposure to high temperatures until it reaches an excellent thickness.

The oxide zone of Carbon Steel Square Pipes provides the proper diffusion conditions for the formation of a protective chromium oxide layer on the surface of the metal. Sachiya Steel International is one of the well – known exporting house and dealer for Carbon Steel Round Pipes, which exhibits unusually good metallurgical stability for an alloy of its strength level. Carbon Steel EFW Pipes shows the superiority of over alloys of similar strength in a gas – carburization test at 1800 Degree F. In boiling nitric acid, at concentrations under 20 %, corrosion rates of Carbon Steel ERW Pipes are less. At 70 % concentration, the rate of Carbon Steel Welded Pipes is a relatively low, where the rates were determined from tests of 72 hours duration.

Carbon Steel Seamless Pipe may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Carbon Steel Seamless Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

The post Carbon Steel Seamless Pipes Manufacture appeared first on Sachiya Steel International Pvt. Ltd..

Carbon steel pipes are widely available and relatively affordable, making it a popular choice for very large projects such as pipelines. Stainless steel pipes are made from an alloy of steel and chromium, and are one of the more expensive types of pipe on the market.

Popular Grades of Carbon Steel Pipes & Tubes

1. API STD 5L GRADE B, SEAMLESS
2. ASTM A 53 GRADE B, SEAMLESS, ASME SA 53 GRADE B, SEAMLESS
3. ASTM A106 GRADE B, SEAMLESS, ASME SA 106 GRADE B, SEAMLESS
4. API 5 LX GRADE X52, SEAMLESS
5. ASTM A 53 GRADE B, WELDED
6. API STD 5 L GRADE B, WELDED
7. API STD 5 LX GRADE X 42, WELDED
8. ASTM A 53 GRADE B, WELDED
9. API 5 L GRADE B, DOUBLE SUBMERGED ARC WELDED (DSAW
10. API STD 5 LX GRADE X 42, DSAW
11. A-120 / A53 GRADE A WELDED

Carbon Steel Pipes

1. Size Range: 1/2” NB to 36” NB
2. Thickness: SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
3. Carbon Steel Pipe Specifications: ASTM A/ASME SA 53 Grade A, B | ASTM A/ASME SA 106 Grade A, B, C | ASTM A/ASME SA 333 Grade 1, 6 | API 5L – PSL 1 Gr. A, B, X42, X46, X52, X56, X60, X65, X70 | API 5L – PSL 2 Gr. B, X42, X46, X52, X56, X60, X65, X70
4. Applications: Oil Refineries, Petrochemicals, Power Generation (Nuclear/Thermal), Steel, Sugar, Boiler Equipments, Pressure Vessels and General Engineering Purposes

1. Specifications: ASTM A/ASME SA 179 | ASTM A/ASME SA 192, ASTM A/ASME SA 210 Gr. 1, C | BS 3059 PART II GR. 360, 440, 620 | DIN 2391, ST 35, ST 37, ST 45, ST 52
2. Size Range: 1/2” to 6”, both OD and NB sizes available
3. Thickness: 50mm to 7.00mm, custom OD and thickness available on request

Applications of Carbon Steel Pipes in Seamless & Welded Form

1. Refineries
2. Power Plants
3. Boilers
4. Ship Building
5. Heat Exchangers
6. Condensers
7. Paper & Pulp
8. Marine Applications
9. Nuclear Power
10. Fossil Fuel Power Plants

We Export Stainless Steel Orifice Flanges Across the Globe!

The post Carbon Steel Pipes Manufactures appeared first on Sachiya Steel International Pvt. Ltd..