Titanium in Stainless Steel 321 Tube Fittings preferentially reacts with carbon in the steel and prevents precipitation of chromium carbides at the grain boundaries, thus preserving corrosion-resistant properties by preventing depletion of chromium near the grain boundaries during exposure within critical temperature range. Austenitic Stainless Steel 321H Tube Fittings during annealing are heated to fairly high temperatures, typically 1050 Degree C – 1100 Degree C to ensure that all chromium carbides present are dissolved and all of the chromium is taken into solution in the austenite.

Stainless Steel 321 Ferrule Fittings is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C. Stainless Steel 321H Double Ferrule Fittings resists polythionic acid stress corrosion cracking in hydrocarbon service.

SS 321/321H Tube To Union Chemical Composition

Stainless Steel 321/321H Tube To Union Mechanical Properties

Equivalent Grades for 321/321H Stainless Steel Ferrule Fitting Tube To Union

SS 321/321H Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 321/321H Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 321 Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

After the welding process, annealing will help improve the resistance of Stainless Steel 317L Union Fittings to corrosion. Stainless Steel 317L Ferrule Fittings has the same composition as regular 317L Stainless Steel, with the exception of the carbon content, which is below 0.03 %. Physical properties and corrosion resistance are excellent; on the other hand, Stainless Steel 317L Double Ferrule Fittings provides protection against inter – granular corrosion in the welded condition.

When in excellent temperatures, Stainless Steel 317L Union Tube Fittings also can resist inter – granular corrosion. It is advisable to apply 317L Stainless Steel Union Fittings when presence in the carbide precipitation range cannot be avoided or when annealing after the welding process is impractical. When exposed to the carbide precipitation range for too long, 317L Stainless Steel Tube Fittings may become damaged and inter – granular attack may be more likely to take place.

SS 317L Tube To Union Chemical Composition

Stainless Steel 317L Tube To Union Mechanical Properties

Equivalent Grades for 317L Stainless Steel Ferrule Fitting Tube To Union

SS 317L Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 317L Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 317L Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

Our Stainless Steel 317 Union Tube Fittings comprises of 11 % to 15 % nickel and 18 % to 20 % chromium. These Stainless Steel 317 Ferrule Fittings is molybdenum comportment austenitic stainless steel which is similar to grade 316, be that as it may, by method for higher molybdenum substance. Our Stainless Steel 317 Double Ferrule Fittings provides higher creep, tensile strength, and stress – to – rupture, at high temperatures than regular stainless steels.

These 317 Stainless Steel Union Fittings is a low carbon grade that offers imperviousness to sharpening, all through welding and other techniques. Our 317 Stainless Steel Tube Fittings i has excellent forming and welding qualities, and the addition of columbium and tantalum helps for exceptional inter – granular corrosion resistance. These 317 Stainless Steel Compression Fittings is similar to grade 321, but with slightly improved corrosion resistance in strongly oxidizing environments.

SS 317 Tube To Union Chemical Composition

Stainless Steel 317 Tube To Union Mechanical Properties

Equivalent Grades for 317 Stainless Steel Ferrule Fitting Tube To Union

SS 317 Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 317 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 317 Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

Тhе hіgh rеsіstаnсе оf Stainless Steel 316Ti Ferrule Fittings аgаіnst strеss соrrоsіоn сrасkіng іs duе tо thе рrеsеnсе оf hіgh аmоunts оf nісkеl іn іts соmроsіtіоn. Моrеоvеr, thе аddіtіоn оf сорреr tо Stainless Steel 316Ti Double Ferrule Fittings dеvеlорs rеsіstаnсе tо sulрhurіс асіd аnd оthеr rеduсіng аgеnts іn bоth аggrеssіvе аnd mіld соndіtіоns. Тhе соrrоsіоn rеsіstаnсе оf grаdе 316Ti Stainless Steel Tube Fittings іs іntеrmеdіаtе bеtwееn suреr аustеnіtіс grаdеs, wіth 6 % mоlуbdеnum соntеnt, аnd stаndаrd аustеnіtіс grаdеs.

316Ti Stainless Steel Compression Fittings іs lеss rеsіstаnt tо nіtrіс асіd, whісh аrе frее оf mоlуbdеnum. The presence of copper in 316Ti Stainless Steel Union Fittings gives its corrosion resistant properties higher than the conventional chrome, nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids.

SS 316TI Tube To Union Chemical Composition

Stainless Steel 316TI Tube To Union Mechanical Properties

Equivalent Grades for 316TI Stainless Steel Ferrule Fitting Tube To Union

SS 316TI Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 316TI Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 316TI Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

Stainless Steel 316 Union Tube Fittings are formulated to have comparable corrosion resistance to standard austenitic steels but with enhanced strength and resistance to stress corrosion cracking. SS 316L Tube Fittings have moderate formability and are magnetic but not so much as the ferritic, martensitic and PH grades due to the 50 % austenitic phase. SS 316L Compression Fittings can develop very high strength by adding elements such as Copper, Niobium and Aluminium to the steel.

With a suitable “aging” heat treatment, very fine particles form in the matrix of SS 316L Union Tube Fittings which imparts strength. Stainless Steel 316 Ferrule Fittings can be machined to quite intricate shapes requiring good tolerances before the final aging treatment as there is minimal distortion from the final treatment. Stainless Steel 316L Double Ferrule Fittings is in contrast to conventional hardening and tempering in martensitic steels where distortion is more of a problem.

SS 316 / 316L Tube To Union Chemical Composition

Stainless Steel 316 / 316L Tube To Union Mechanical Properties

Equivalent Grades for 316 / 316L Stainless Steel Ferrule Fitting Tube To Union

SS 316 / 316L Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 316 / 316L Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 316 Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

Stainless Steel 310H Union Fittings is a modification of Type 321 with a controlled higher carbon content, to provide improved high temperature strength. A limitation with Stainless Steel 310H Ferrule Fittings is that titanium does not transfer well across a welding arc, so is not usable as a welding consumable. Stainless Steel 310H Double Ferrule Fittings is therefore used – the niobium performs the same carbide stabilization task but can be transferred across a welding arc.

310H Stainless Steel Compression Fittings is only occasionally used as parent plate material. Like other austenitic grades, 321 has excellent forming and welding characteristics, is readily brake or roll formed and has outstanding welding characteristics. 310H Stainless Steel Tube Fittings is therefore the standard consumable for welding Grade 321. Post – weld annealing in 310H Stainless Steel Union Fittings is not required.

SS 310H Tube To Union Chemical Composition

Stainless Steel 310H Tube To Union Mechanical Properties

Equivalent Grades for 310H Stainless Steel Ferrule Fitting Tube To Union

SS 310H Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 310H Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 310H Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

In practice, Stainless Steel 310 Union Fittings are not precisely distinguished by these dimensions, and there is considerable overlap in the use of the two terms. In principle, Stainless Steel 310S Ferrule Fittings is a melting, purifying, and alloying process carried out at approximately 1,600 Degree C (2,900 Degree F) in molten conditions. Various chemical reactions are initiated in Stainless Steel 310 Double Ferrule Fittings, either in sequence or simultaneously, in order to arrive at specified chemical compositions and temperatures.

Indeed, many of the reactions interfere with one another in 310S Stainless Steel Tube Fittings, requiring the use of process models to help in analyzing options, optimizing competing reactions, and designing efficient commercial practices. These 310S Stainless Steel Tube Fittings are offered at best possible rates to our customers.

SS 310 / 310S Tube To Union Chemical Composition

Stainless Steel 310 / 310S Tube To Union Mechanical Properties

Equivalent Grades for 310 / 310S Stainless Steel Ferrule Fitting Tube To Union

SS 310 / 310S Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 310 / 310S Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 310 Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

Stainless Steel 304H Tube to Union Fittings Manufacturer In India | Stainless Steel 304H Tube to Union Fittings Manufacturer In Mumbai | Stainless Steel 304H Tube to Union Fittings Exporter In India | Stainless Steel 304H Tube to Union Fittings Exporter In Mumbai | Stainless Steel 304H Tube to Union Fittings Supplier In India 

Due to all of these characteristics, Stainless Steel 304H Compression Tube Fittings can be used for a wide variety of applications, including sea-water applications. To demonstrate this reaction, these Stainless Steel 304H Ferrule Fittings of annealed were exposed to 1200 Degree F, 1400 Degree F, and 1600 Degree F for 2000 hours contracted about 0.048 %. Measurements were made to determine dimensional stability of Stainless Steel 304H Double Ferrule Fittings, where 1800 Degree F is a temperature at which scaling resistance becomes a significant factor in service.

Extensive investigation of the stability of these SS 304H Union Fittings following exposure for extended periods in the 1000 Degree F to 1800 Degree F temperature range has shown complete absence of embrittling intermetallic phases such as sigma.

SS 304H Tube To Union Chemical Composition

Stainless Steel 304H Tube To Union Mechanical Properties

Equivalent Grades for 304H Stainless Steel Ferrule Fitting Tube To Union

SS 304H Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 304H Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 304H Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

Stainless Steel 304L Tube to Union Fittings Manufacturer In India | Stainless Steel 304L Tube to Union Fittings Manufacturer In Mumbai | Stainless Steel 304L Tube to Union Fittings Exporter In India | Stainless Steel 304L Tube to Union Fittings Exporter In Mumbai | Stainless Steel 304L Tube to Union Fittings Supplier In India

Combined with its low carbon content, Stainless Steel 304L Union Tube Fittings is also effective at resisting embrittlement. Stainless Steel 304L Ferrule Fittings is commonly utilized in extreme conditions, such as furnace manufacturing and heat treating equipment. While both hot and work practices can be applied, cold working is not commonly done on Stainless Steel 304L Double Ferrule Fittings; however, it is the only way to work – harden the metal.

This resistance to cold temperatures is useful in cryogenic environments, as SS 304L Tube Fittings is incredibly tough. However, SS 304L Compression Fittings can be subject to thermal shock and therefore should be treated and hot – worked with care. SS 304L Union Fittings has ultra – high nickel content of 34 percent to 37 percent also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres.

SS 304L Tube To Union Chemical Composition

Stainless Steel 304L Tube To Union Mechanical Properties

Equivalent Grades for 304L Stainless Steel Ferrule Fitting Tube To Union

SS 304L Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 304L Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 304L Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..

The additions of Silicon and Manganese have given Stainless Steel 304 Union Fittings a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths for Stainless Steel 304 Reducing Union are attainable through cold working the material and are still fully austenitic after severe cold – working.

In addition, Stainless Steel 304 Double Ferrule Fittings has very good mechanical properties at both elevated and sub – zero temperatures. And, unlike many austenitic stainless steels, SS UNS S30400 Bulkhead Union does not become magnetic when cold worked. The benefit to the cold or hot work put into SS 304 Compression Fittings is added strength and hardness, and the wear resistance does not decrease noticeably. Chromium and Nickel additions give it comparable corrosion to SS 304 Union Tube Fittings, while having approximately twice the yield strength.

SS 304 Tube To Union Chemical Composition

Stainless Steel 304 Tube To Union Mechanical Properties

Equivalent Grades for 304 Stainless Steel Ferrule Fitting Tube To Union

SS 304 Tube To Union Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Stainless Steel 304 Tube To Union Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

The post Stainless Steel 304 Tube to Union Fittings Manufacturer appeared first on Sachiya Steel International Pvt. Ltd..