Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Cupro Nickel 70 Nipple, which is known for its moderate strength, workability, formability and weldability. Our Cu-Ni 70 / 30 Hexagon Reducing Nipple are often used in Pump Impellers, Heat Exchanger Tubes, Evaporator Tubes, Distiller Tubes, Condenser Plates, Refrigerators, Process Equipment, and Condenser Components. The services of these Cupro Nickel 70 / 30 Hexagon Nipple, which include the provision of technical advice and information, are available to those interested in the utilization of copper in all its aspects.
Our Copper Nickel 70 / 30 One End Threaded Nipple can be utilized up to 700 Degree F for ASME code heat exchangers and unfired pressure vessels. Our Cu-Ni 70 / 30 Both End Threaded Nipple falls into the moderate to poor machining ability category due to its durability. The corrosion resistance and strength of Cupro Nickel 70 / 30 Concentric Swaged Nipple are improved by the addition of manganese, iron, niobium, and or chromium.
These Copper Nickel 70 / 30 Eccentric Swaged Nipple is also used in desalination industry, marine engineering, extensively used in the chemical, petrochemical and electrical industries. Cu-Ni 70 / 30 Concentric Nipple was developed specifically for seawater service over decades ago, initially for condensers and piping systems. Good thermal conductivities and ductility down to cryogenic temperatures are also important features of these Cu-Ni 70 / 30 Hex Nipple in their range of applications.
Cu-Ni 70/30 Nipple |
||
| Specifications | : | ASTM B466, ASME SB466 |
| Dimensions | : | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Size | : | 2 1/16” to 30” |
Cu-Ni 70/30 Nipple Chemical Composition
| Cu-Ni 70/30 | Cu | Pb | Mn | Fe | Zn | Ni |
| 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
Cu-Ni 70/30 Nipple Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
Equivalent Grades for Cu-Ni 70/30 Nipple
| STANDARD | UNS | WERKSTOFF NR. |
| Cupro Nickel 70/30 | C71500 | 2.0882 |
Cu-Ni 70/30 Nipple Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Cu-Ni 70/30 Nipple Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)