Sachiya Steel International is one of the well-known Manufacture And Exporter of Hastelloy B3 Wire which can be hot forged, hot rolled, hot upset, hot extruded, and hot formed. Hastelloy B3 Wire exhibits high resistance to chloride – induced pitting and crevice attack, and forms of corrosion to which the austenitic stainless steels are particularly prone. To assess the resistance of alloys to pitting and crevice attack, Hastelloy B3 Coil Wires is customary to measure their Critical Pitting Temperatures and Critical Crevice Temperatures in acidified ferric chloride, in accordance with the procedures defined in ASTM Standard.
Hastelloy B3 Wire represents the lowest temperatures at which pitting and crevice attack is encountered in this solution, within 72 hours. Wrought products of our Hastelloy B3 Wire are supplied in the Mill Annealed (MA) condition, unless otherwise specified. This solution annealing procedure in Hastelloy B3 Wires has been designed to optimize the alloy’s corrosion resistance and ductility.
Following all hot forming operations, our Alloy B3 Coil Wire should be re – annealed, to restore optimum properties. Alloy B3 Wire should also be re – annealed after any cold forming operations that result in an outer fiber elongation of 7 % or more. However, our Alloy B3 Coil Wire is more sensitive to strain and strain rates than the austenitic stainless steels, and the hot working temperature range is quite narrow.
Hastelloy B3 Wire Specifications |
||
| Specifications | : | ASTM B335 ASME SB335 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | Fe | S | Cr | Mo | Ni | Ti |
| Hastelloy B3 | 0.01 max | 3.0 max | 0.10 max | 15 | 0.03 max | 1.5max | 28.5 | 65.0 min | 0.2 max |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Hastelloy B3 |
| STANDARD | WERKSTOFF NR. | UNS |
| Hastelloy B3 | 2.4600 | N10675 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)