Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy C22 Angle And Other Hastelloy Products, which is considered moderate to the difficult and to the machine one. Nickel – based alloys such as Hastelloy C22 Angle have a tendency to crater crack, so grinding in starts and stops is recommended. Prior to any welding in Hastelloy C22 Chain, all foreign matter (grease, cutting fluids, crayon markings, scale) should be removed. Hastelloy C22 C-Channel can still be machined using conventional production methods used for other alloys at a satisfactory rate. In any process system, Hastelloy C22 H-Beam is much more cost – effective to proactively design for corrosion control than to reactively make repairs because of design deficiencies.
Until now, sanitary process system designers in Hastelloy C22 T-Beam have been limited to 300 series stainless steels. These options have grown to include the super – austenitic stainless steel, as well as nickel alloys such as Hastelloy C22 I-Beam for sanitary tubing and fittings. During machining, our Alloy C22 Angle can harden rapidly, generate high heat, weld to the cutting tool surface, and resist metal removal, because of its high shear strength.
Although Alloy C22 Chain solves several corrosion issues plaguing processors’ systems, it is not the answer to all corrosion problems. Our Alloy C22 C-Channel is used in industries such as chemical, biotechnology, and pharmaceutical processing; both oxidizing and reducing acids, or chlorides and high process temperatures may be present.
Hastelloy C22 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B574 / ASME B574 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Hastelloy C22 Angle |
: | 5mm to 9mm |
| Hastelloy C22 Channel |
: | 40mm*20mm~300mm*300mm |
| Hastelloy C22 Beam | : | 3″ thru 12.31″ |
| Hastelloy C22 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
C22 Hastelloy Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Co | P | Fe | Mo | Ni | Cr | S | W | V |
| Hastelloy C22 | 0.010 max | 0.50 max | 0.08 max | 2.5 max | 0.02 max | 2 – 6 | 12.5 – 14.5 | Bal | 20 – 22.5 | 0.02 max | 2.5 – 3.5 | 0.35 max |
Hastelloy C22 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.69 g/cm3 | 1399 °C (2550 °F) | Psi – 1,00,000 , MPa – 690 | Psi – 45000 , MPa – 310 | 45% |
Equivalent Grades for C22 Hastelloy Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| Hastelloy C22 | 2.4602 | N06022 | NW 6022 | NiCr21Mo14W |
Hastelloy C22 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
C22 Alloy Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)