Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy 800 Hydraulic Fittings, which has some of the finest features such as tough design, high tensile potency, hard – wearing and more. Incoloy 800HT Hydraulic Fittings (UNS N08811) is iron – nickel – chromium alloy that has a lot of the same features of other members of the 800 alloy assemblage. Incoloy 800H Hydraulic Fittings (UNS N08810) has an additional carbon and annealing conduct that permits for higher rupture and creep properties for beyond 600 Deg C. Incoloy 800 Hydraulic Fittings (UNS N08800) is used for heat exchangers, process piping, heating – element sheathing, nuclear steam – generator tubing and carburizing equipment.
Meanwhile, these Incoloy 800 Forged Hydraulic Fittings are also being offered in different sizes and shapes to our customers. Incoloy 800H Forged Hydraulic Fittings are used in a variety of applications involving exposure to corrosive environments and high temperatures such as heat treating equipment, nuclear power plants and the paper pulp industry, chemical and petrochemical processing.
These Incoloy 800HT Forged Hydraulic Fittings is used in a variety of applications involving exposure to corrosive environments and high temperatures. Alloy 800 Hydraulic Type Fittings is often used in ammonia effluent coolers, and so are easily welded and processed by standard shop fabrication practices. These Alloy 800H Hydraulic Type Fittings exhibits good ductility and hence can be formed using conventional methods.
Incoloy 800/800H/800HT Hydraulic Fittings Specifications |
||
| Specifications | : | ASTM B366 / ASME SB366 |
| Size | : | 1/16” to 2″ inch |
| Thread | : | NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| PTFE Standards | : | ASTM 3294, ASTM D1710 |
| Applicable temperature | : | 150-400°C |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Incoloy 800/800H/800HT Hydraulic Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
Incoloy Alloy 800/800H/800HT Hydraulic Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Equivalent Grades for Alloy 800/800H/800HT Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Incoloy 800/800H/800HT Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Incoloy 800/800H/800HT Hydraulic Tube Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)