Incoloy 800 Nuts Manufacturer

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy 800 Nuts And Bolts , which is extremely resistant to corrosion and even in acidic environment. Because of its high nickel and chromium content, Incoloy 800 Hex Head Bolts resist oxidation and carburization at high temperatures. The chemical balance allows the Incoloy 800H Square Nuts to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. For the first time, aluminum and titanium were listed as purposeful additions, and annealed Incoloy 800HT U-Bolts was differentiated from solution – annealed material.

Incoloy 800 Nuts
              Incoloy 800 Nuts

Incoloy 800 Lock Nuts will not become embrittled even after long periods of usage in the 1200 Degree F – 1600 Degree F range where many stainless steels become brittle. The restricted chemical compositions, combined with the high temperature anneal, assure these materials have greater creep and rupture strength when compared to Incoloy 800H Eye Bolts.

Many companies in a wide range of industries utilize Incoloy 800HT Wing Nuts for a number of applications, especially those that deal with temperatures about 1100 Degree F (600 Degree C). Incoloy 800 T-Bolts is especially useful for high – temperature equipment in the petrochemical industry since the alloy doesn’t form the embrittling sigma phase after long time exposure at 1200 Degree F. Incoloy 800H Panel Bolts have nickel – chromium – iron as the base metals, with additives such as molybdenum, copper, silicon and nitrogen.

Alloy 800/800H/800HT Bolt/Nut Specifications
Specifications : ASTM B 408 ASME SB 408
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
800/ 800H/ 800HT Incoloy Alloy Bolt/Nut Chemical Composition
Grade C Mn Si Fe S Cr Al-Ti Ni
800 min. 39.5 19.0 0.15 30.0
max. 0.1 1.5 1.0 0.015 23.0 0.60 35.0
800H min. 0.05 39.5 19.0 0.15 30.0
max. 0.1 1.5 1.0 0.015 23.0 0.60 35.0
800HT min. 0.06 39.5 19.0 0.85/0.25 30.0
max. 0.1 1.5 1.0 0.015 23.0 1.20/0.60 35.0
Incoloy Alloy 800/ 800H/ 800HT Bolt/Nut Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
800-H-HT Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa –205 30
Equivalent Grades for 800 / 800H / 800HT Incoloy Bolt/Nut
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T
Alloy 800/800H/800HT Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
800/800H/800HT Incoloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *