Incoloy 825 Tube to Male Fittings Manufacturer

Sachiya Steel International is one of the Manufacturer And Exporter of Incoloy 825 Tube to Male Fittings, which has good weldability for all conventional processes. Heavy duty machining equipment and tooling in Incoloy 825 Tube Fittings should be used to minimize chatter or work-hardening of the alloy ahead of the cutting. Incoloy 825 Compression Fittings is the face – centered cubic lattice structure, which is hardened by cold work only. If exposed for long times to the sensitive temperature range 1200 Degree F – 1400 Degree F, Incoloy 825 Compression Tube Fittings may exhibit severe inter – granular corrosion in certain very aggressive environments.

However, exposure to temperatures above 1000 Degree F in Incoloy 825 Ferrule Fittings can result in microstructural changes that significantly lower ductility and impact strength. In reducing & oxidizing conditions, Incoloy 825 Double Ferrule Fittings resists general corrosion, pitting and crevice corrosion, inter – granular corrosion and stress corrosion cracking. Incoloy 825 Male Connector Fittings is an austenitic nickel – iron – chromium alloy with additions of molybdenum, copper and titanium, where the corrosion resistance of deposited weld metal from both covered electrode and bare wire is equivalent to that of the parent metal.

The resistance of Alloy 825 Tube Fittings to general and localized corrosion under diverse conditions gives the alloy broad usefulness. Alloy 825 Compression Fittings is characterized by approval for pressure vessels with wall temperatures up to 450 Degree C (842 Degree F).

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)