Sachiya Steel International deals in a widespread range of Inconel 600 Wire Mesh, where it is widely demanded among the clienteles because of its different uses. Inconel 600 Wire Mesh is as well a nickel – chromium alloy by means of first – rate oxidation resistance at soaring temperatures. Alloy 600 Hexagonal Wire Mesh is a nickel – base alloy by means of outstanding carburization and has outstanding cold and hot workability. Inconel 600 Welding Wire Mesh is willingly weldable and used in a number of corrosion resisting uses. Inconel 600 Netting Wire Mesh is non – magnetic and holds an outstanding combination of soaring potency.
Inconel 600 Woven Wire Mesh (UNS N06600) was considered for service temp from cryogenic to high temperatures in the array of 2000 Degree F. Alloy 600 Fencing Wire Mesh is often used in heaters, chemical process equipment, heat exchangers, heat treat furnace fixtures and components, and gas turbine components.
Alloy 600 Wire Mesh also has excellent mechanical properties and has a desirable combination of high strength and good workability. We offer Alloy 600 Hexagonal Wire Mesh in a range of gauges to meet any application or performance requirements. Alloy 600 Welding Wire Mesh can be defined as the perfect combination of high strength and good weld ability along with excellent mechanical properties. Meanwhile, this Inconel 600 Spring Steel Wire Mesh is also being offered in different sizes and shapes to our customers.
Inconel 600 Wiremesh Specifications |
||
| Specifications | : | ASTM / ASME B 166, SB 166 |
| Standard | : | ASTM / ASME |
| Size | : | M10 TO M100 |
| Length | : | UUPTO 1 METERS |
| Type | : | Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc. |
600 Inconel Wire Mesh Chemical Composition
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
| 600 | min. | – | – | – | 6.0 | – | 14.0 | – | 72.0 |
| max. | 0.15 | 1.0 | 0.5 | 10.0 | 0.015 | 17.0 | 0.5 | – | |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 600 | Psi – 95,000 , MPa -655 | Psi – 45,000 , MPa – 310 | 40 | – | – |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)