Inconel 601 Tube to Female Pipes Manufacturer

Inconel 600 Tube to Female Pipes
Inconel 600 Tube to Female Pipes Manufacturer
October 28, 2021
Inconel 625 Tube to Female Pipes
Inconel 625 Tube to Female Pipes Manufacturer
October 29, 2021
Inconel 601 Tube to Female Pipes

Inconel 601 Tube to Female Pipes

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Inconel 601 Tube to Female Pipes, where oxidation resistance is further enhanced by the aluminum content. Inconel 601 Tube Fittings is used in several industries such as Thermal Processing, Power Generation, Aerospace and Chemical Processing. Tubing in these Inconel 601 Compression Fittings has been used in ceramic tile production in the latest designs of roller hearth ovens as the material resists the high temperature firing cycle and the corrosive effects of the glazes and stucco applied to the tiles.

Inconel 601 Female Connector Fittings is often used in Radiant tubes, Steam super – heater tube supports, Muffles and retorts, Strand annealing tubes, etc. These Inconel 601 Ferrule Fittings has good strength, toughness and ductility, and can be used at cryogenic temperatures. All standard machining operations may be performed on Inconel 601 Double Ferrule Fittings, where best machinability is obtained in the solution – treated condition.

In pollution – control applications, these Inconel 601 Compression Tube Fittings is used for thermal reactors in exhaust systems of gasoline engines and for combustion chambers in solid – waste incinerators. Alloy 601 Tube Fittings is also used in tube supports grid barriers, and ash – handling systems for power generation equipment. These Inconel 601 Compression Fittings is welded using gas – tungsten arc welding, gas metal – arc welding, shielded metal – arc welding, and submerged – arc welding methods.

Inconel 601 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 6010 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
601 Inconel Alloy Tube to Female Pipes Chemical Composition
Grade C Mn Si Fe S Cr Cu Ni
601 min. Bal 21.0 58.0
max. 0.10 1.0 0.5 Bal 0.015 25.0 1.0 63.0
Inconel Alloy 601 Tube to Female Pipes Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
601 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40
Equivalent Grades for 600 Inconel Tube to Female Pipes
Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 601 N06601 NA 49 NiCr23Fe 2.4851 NC23FeA XH60BT NCF 601
Inconel Alloy 601 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Inconel 601 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote