Sachiya Steel International offers a wide range of Inconel 601 Wire, which develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling. Other applications of our Inconel 601 Wires include thermocouple protection tubes, condenser tubes, process heaters, and so on. This Inconel 601 Wire is best forged, for large deformations, between 2250 Degree F and 1900 Degree F, but forging may be continued to 1650 Degree F. Due to high chromium and some aluminum content in our Inconel 601 Coil Wire, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.
This Inconel 601 Electrode is often used in Chemical Processing, Heat treating industry, Aerospace, Power generation and so on. Our Inconel 601 Wire is a standard material of construction for various types of thermal – processing equipment. This Inconel 601 Wire has good creep rupture strength, along with readily joined by conventional welding products and processes. Our Alloy 601 Wire can be machined using conventional machining methods which are used for iron – based alloys.
This Alloy 601 Coil Wire is not suggested for use in strongly reducing and sulfur bearing environments. Our Alloy 601 Wire is a Nickel – Chromium alloy with an addition of Aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. This Alloy 601 Wire also has high mechanical properties at elevated temperatures.
Inconel 601 Wire Specifications |
||
| Specifications | : | ASTM B166 ASME SB166 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Inconel 601 |  0.10 max | 1.00 max | 0.50 max |  1.00 max | 0.015max | 21.00 – 25.00 | bal |  58.0-63.0 |  – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.1 g/cm3 | 1411 °C (2571 °F) |  Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)