Inconel 625 Tube to Female Pipes Manufacturer

Inconel 601 Tube to Female Pipes
Inconel 601 Tube to Female Pipes Manufacturer
October 29, 2021
Incoloy 800 Tube to Female Pipes
Incoloy 800 Tube to Female Pipes Manufacturer
October 30, 2021
Inconel 625 Tube to Female Pipes

Inconel 625 Tube to Female Pipes

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Tube to Female Pipes, which has good strength / ductility properties from sub – zero temperatures to over 980 Degree C. Inconel 625 Tube Fittings in the soft annealed condition are characterized by good resistance to mineral acids such as nitric, phosphoric, hydrochloric and sulfuric acid. Inconel 625 Compression Fittings has excellent forming and welding characteristics, where hot forming should be performed within a temperature range of 1700 Degree F to 2150 Degree F.

Some applications requiring the combination of strength and corrosion resistance offered by Inconel 625 Female Connector Fittings are bubble caps, reaction vessels, tubing, distillation columns, transfer piping, valves and heat exchangers. Inconel 625 Ferrule Fittings is produced by vacuum induction melting or by AOD refining, where niobium stabilizes the alloy contrary to sensitization in the course of welding. Inconel 625 Double Ferrule Fittings is often used for Air Pollution Control, such as in chimney liners, flue gas desulfurization (FGD) components, dampers, etc.

Inconel 625 Compression Tube Fittings is also used in oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150 Degree C. Inconel 625 Tube Fittings is a nickel – chromium alloy used for its high strength, outstanding corrosion resistance and excellent fabricability. Alloy 625 Compression Fittings is not only nickel based super alloy, but also Non – Magnetic and Corrosion resistant in nature.

Inconel 625 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 6250 PSI
Applicable Temperature
: 150-400 C
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
625 Inconel Alloy Tube to Female Pipes Fitting Chemical Composition
Grade C Mn Si Fe S Cr2 Al-Ti Ni
625 min. 20.0 58.0
max. 0.10 0.50 0.50 5.0 0.015 23.0 0.40
Inconel Alloy 625 Tube to Female Pipes Fitting Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
625 Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5
Equivalent Grades for 600 Inconel Tube to Female Pipes Fitting
Grade UNS No Old British Euronorm GOST Japanese JIS
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M ХН75МБТЮ NCF 625
Inconel Alloy 625 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Inconel 625 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote