Inconel 625 Tube to Male Fittings

Inconel 625 Tube to Male Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 625 Tube to Male Fittings, which provides excellent corrosion resistance in a wide variety of severe corrosive environments due to its high alloy content. These Inconel 625 Tube Fittings in the soft annealed condition are characterized by immunity to chloride – induced stress corrosion cracking. Because the alloy is developed to retain high strength at elevated temperatures, our Inconel 625 Compression Fittings resists deformation at hot-working temperatures and higher loads are required to cause the material to deform.

Product and technology applications of these Inconel 625 Male Connector Fittings include: Chemical process equipment, Engine thrust – reverser systems, Specialized seawater equipment, Turbine shroud rings, and Jet engine exhausts systems. Its high strength enables our Inconel 625 Ferrule Fittings to be used, for example, in thinner – walled vessels or tubing than possible by means of other materials, thus improving heat transfer and saving weight.

These Inconel 625 Double Ferrule Fittings is resistant to inter – granular corrosion even in the welded condition, where pitting and crevice corrosion are prevented by molybdenum. Our Inconel 625 Compression Tube Fittings is often used for Aerospace Components, such as in bellows and expansion joints, jet engine exhaust systems, ducting systems, engine thrust – reversers and turbine shroud rings. These Alloy 625 Tube Fittings is as well used in components where exposure to sea water and high mechanical stresses are required.

Inconel 625 Tube to Male Fittings Specifications
Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Inconel, 300/1000/3000PSI for Brass

Inconel Alloy 625 Tube To Male Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 625 0.10 max 0.50 max 0.50 max 0.015max 5.0 max 58.0 min 20.0 – 23.0

Inconel 625 Tube To Male Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Equivalent Grades for 625 Inconel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4MNiCr22Mo9Nb NiCr23Fe

 

Alloy 625 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 625 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Leave a Comment

Your email address will not be published. Required fields are marked *