Sachiya Steel International offers a wide range of Inconel 718 Wire which associates good creep and rupture strength with a high resistance to fatigue. Popular uses of this Inconel 718 Wire are high strength bolting, and down hole shafting. Hot – cold working of our Inconel 718 Wire in the range 1700 Degree F / 1850 Degree F (927 Degree C / 1010 Degree C) will improve the strength of the forging if the service temperature is below about 1100 Degree F (593 Degree C).
Examples of this Inconel 718 Coil Wire are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land – based gas turbine engines, and cryogenic tankage. Our Inconel 718 Welding Wire has good resistance to oxidation and corrosion at temperatures in the alloy’s useful strength range in atmospheres encountered in jet engines and gas turbine operations. This Inconel 718 Electrode has relatively good weldability, formability, and excellent cryogenic properties compared to other precipitation hardening nickel alloys.
Other popular nickel – chromium alloys like our Inconel 718 Wires are age hardened through the addition of aluminum and titanium. This Alloy 718 Wire has better mechanical properties at lower temperatures than Nimonic 90 Electrode & Inconel X – 750 Electrode. Our Alloy 718 Wire combines corrosion resistance and high strength with outstanding weldability including resistance to post – weld cracking.
Inconel 718 Wire Specifications |
||
| Specifications | : | ASTM B637 ASME SB637 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.30 max | 0.15 max | 17.0-21.0 | – | 50.0-55.0 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 718 | 2.4668 | No7718 | NCF 718 | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)