Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel Alloy 601 Bolts And Nuts , which has high mechanical properties at elevated temperatures. An outstanding characteristic of these Inconel 601 Hex Head Bolts is its resistance to high temperature oxidation. Inconel 601 Hex Head Nuts is used for industrial furnaces, thermocouple tubes, radiant tubes, heat treatment equipment, baskets, muffles, retorts. These Inconel 601 Square Bolts has good high temperature strength and retains its ductility after long service exposure, with good corrosion resistance under oxidizing conditions.
Inconel 601 Square Nuts is also used in catalyst supports in nitric acid manufacture, exhaust systems in gasoline engines and combustion chambers. These Inconel 601 U-Bolts shows low ductility between 1600 Degree F and 1200 Degree F and should not be forged in this temperature range. Applications of Inconel 601 Lock Nuts are trays, baskets and fixtures, which are used in various heat treatments such as carburizing and carbon nitriding. These Inconel 601 Eye Bolts is as well used for catalyst support grids in nitric acid production, and for steam super – heater tube supports.
In industrial furnaces, Inconel 601 Eye Nuts is used for radiant tubes, chain curtains, flame shields, muffles, retorts, strand – annealing tubes, woven – wire conveyor belts, burner nozzles, and electrical resistance heating elements. These Inconel 601 Hex Bolts is quite often used in Petrochemical Processing, Gas Turbine Components, Industrial Furnaces and Heat Treating Equipment applications.
Alloy 601 Bolt/Nut Specifications |
||
| Specifications | : | ASTM B 166 ASME SB 166 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Type | : | Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
601 Inconel Alloy Bolt/Nut Chemical Composition
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
| 601 | min. | – | – | – | Bal | – | 21.0 | – | 58.0 |
| max. | 0.10 | 1.0 | 0.5 | Bal | 0.015 | 25.0 | 1.0 | 63.0 | |
Inconel Alloy 601 Bolt/Nut Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 601 | Psi – 95,000 , MPa -655 | Psi – 45,000 , MPa – 310 | 40 | – | – |
Equivalent Grades for 601 Inconel Bolt/Nut
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 601 | N06601 | NA 49 | NiCr23Fe | 2.4851 | NC23FeA | XH60BT | NCF 601 |
Alloy 601 Bolt/Nut Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
601 Inconel Bolt/Nut Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)