Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 625 Hydraulic Fittings, which has outstanding features such as durable built, precise dimensions, perfect finish, and so on. Inconel 625 Hydraulic Forged Fittings is strong to seawater, in both stagnant and flowing circumstances, and under fouling. The skill of Inconel 625 Forged Hydraulic Fittings to endure high stress and an extensive variety of temperatures, both in and out of water, in addition to being able to resist corrosion even though being exposed to extremely acidic atmospheres makes it an appropriate selection for marine and nuclear applications.
Inconel UNS N06625 Hydraulic Fittings is excellent for sea water uses, and thus has exceptional crevice corrosion, inter – crystalline corrosion and resistance to pitting. Meanwhile, these Inconel 625 Hydraulic Type Fittings are also being offered in different sizes and shapes to our customers. Alloy 625 Hydraulic Fittings is resistant to high temperature oxidation and carburization, where thus precipitation – hardening treatments are not required. Alloy 625 Hydraulic Forged Fittings in the solution annealed condition are characterized by good resistance to many types of hot gas corrosion, particularly chlorination.
Solution annealed Alloy 625 Forged Hydraulic Fittings is commonly used for applications above 1500 Degree F where resistance to creep is important. Alloy 625 Hydraulic Type Fittings is also being considered in advanced reactor concepts because of its high allowable design strength at elevated temperatures, especially in the range of 1200 Degree F – 1400 Degree F (649 Degree C – 760 Degree C).
Inconel 625 Hydraulic Fittings Specifications |
||
| Specifications | : | ASTM B366 / ASME SB366 |
| Size | : | 1/16” to 2″ inch |
| Thread | : | NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| PTFE Standards | : | ASTM 3294, ASTM D1710 |
| Applicable temperature | : | 150-400°C |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Inconel 625 Hydraulic Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
Inconel Alloy 625 Hydraulic Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Equivalent Grades for Alloy 625 Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
Inconel Alloy 625 Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Inconel 625 Hydraulic Tube Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)