Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel Alloy 718 Hydraulic Fittings to the customers, which has outstanding features such as durability, sturdy construction, high performance, and so on. Inconel 718 Forged Hydraulic Fittings is age harden able and may perhaps be welded in completely aged form, where hot – functioning is performed by using 1121 Deg C maximum furnace temp. Inconel 718 Hydraulic Forged Fittings is used for gas turbines, aerospace, rocket motors, space shuttles, spacecraft, nuclear reactors, turbo pump seals, tooling and pumps. One of the characteristic properties of Alloy 718 Forged Hydraulic Fittings configuration is the adding of niobium content to allow age toughening that permits welding and annealing devoid of impulsive toughening during cooling and heating.
Meanwhile, these Inconel 718 Hydraulic Type Fittings are also being offered in different sizes and shapes to our customers. Inconel UNS N07718 Hydraulic Fittings is designed to overcome the low weldability of this class of materials, generally susceptible to cracks (microstructural segregation of alloying elements in the heat – affected zone of welds). In addition, because of the fine grain developed, Nickel-Alloy 718 Hydraulic Fittings produces the highest fatigue strength.
Nickel-Alloy 718 Forged Hydraulic Fittings is often used in valves, fasteners, springs, mandrels, tubing hangers, well head completion equipment and blow out preventers, gas turbine engine parts, etc. These Alloy 718 Hydraulic Type Fittings is also used in Oil & Gas Extraction, Defense, Automotive, Nuclear and Aerospace.
Inconel 718 Hydraulic Fittings Specifications |
||
| Specifications | : | ASTM B366 / ASME SB366 |
| Size | : | 1/16” to 2″ inch |
| Thread | : | NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| PTFE Standards | : | ASTM 3294, ASTM D1710 |
| Applicable temperature | : | 150-400°C |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Inconel 718 Hydraulic Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015max | 0.30 max | – | 50.00 – 55.00 | 17.00 – 21.00 |
Inconel Alloy 718 Hydraulic Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Equivalent Grades for Alloy 718 Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 718 | 2.4668 | N07718 | – | – | – | – | – |
Inconel Alloy 718 Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Inconel 718 Hydraulic Tube Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)