Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Monel Alloy 400 Wire , which is in fact used most commonly in high temperature brazing applications. Our Monel 400 Wire is generally being used when specifications call for corrosion resistance and high – temperature service properties. This Monel 400 Coil Wire can also be used in sub – zero applications as low as the temperature of liquid oxygen, helium, or nitrogen. Nickel brazing alloys have low vapor pressure, making our Monel 400 Welding Wire suited to vacuum systems and vacuum tube applications.
With their joint strength and resistance to corrosion, this nickel brazing Monel 400 Electrode is ideal for jet engine parts and assemblies, food handling equipment, nuclear energy and carbide tools. Our Monel 400 Welding can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.
This Alloy 400 Electrode is a solid solution alloy that can be hardened by the process of cold working. Our Alloy 400 Filler Wire is also known as super alloy, where series of nickel – copper alloys are grouped. The proportions of copper and nickel used to make this Alloy 400 Welding Wire are the same as that found in the nickel ore found in Ontario mines.
Monel 400 Wire Specifications |
||
| Specifications | : | ASTM B164 ASME SB164 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire, Electrode Wire, Welding Wire. |
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 28.0-34.0 | 0.24max | – | 2.50 max | 63.00 min | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40% |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NCF 400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)