Nickel Alloy 201 Tube to Female Pipes

Nickel Alloy 201 Tube to Female Pipes Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Tube to Female Pipes, which consists of low carbon version of the alloy. Nickel 201 Tube Fittings is associate solid solution heat resistant alloy with wonderful resistance to oxidization underneath gently cyclic conditions through 2000 Degree F. Nickel 201 Compression Fittings is quickly fancied by commonplace industrial procedures. Nickel 201 Female Connector Fittings is compared to steel and unsullied steels that are harder and have a tendency to figure harden speedily.

Nickel Alloy 201 Tube to Female Pipes
Nickel Alloy 201 Tube to Female Pipes

Nickel 201 Ferrule Tube Fittings is a heat resisting steel with high resistance to oxidization scaling and has high strength at elevated temperatures. Nickel 201 Double Ferrule Tube Fittings may be welded victimization all of the common attachment processes. Alloy 201 Compression Tube Fittings is combined with higher creep properties at temperature and unsullied which is incredibly powerful and ductile. The unsullied of Ni 201 Female Connector Fittings has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.

With its high metal content, Nickel 201 Tube Fittings offers smart corrosion resistance to extend warmth properties. The high metal and nickel contents of Nickel 201 Compression Fittings offer comparable corrosion resistance and superior resistance to oxidization and therefore the retention of a bigger fraction of temperature strength than the common solid solution alloys like sort 304.

Nickel 201 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 4000 PSI
Applicable Temperature
: 150-400 C
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
201 Nickel Alloy Tube to Female Pipes Fitting Chemical Composition
Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max 0.35 max 0.35 max 0.40 max 0.01 max 0.25 max
Nickel Alloy 201 Tube to Female Pipes Fitting Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %
Equivalent Grades for 201 Nickel Tube to Female Pipes Fitting
Nickel 201 N02201 2.4068 LC-Ni 99 NW 2201 NA 12 НП-2
Nickel Alloy 201 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel 201 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *