Nickel Alloy 200 Nipple Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Nipple, which is designed specifically to withstand sulphuric acid. Our Nickel 200 Hexagon Reducing Nipple is an iron – base and austenitic alloy with excellent corrosion resistance to a number of different media. This Nickel 200 Hexagon Nipple has proven to be useful in a number of applications such as flue – gas desulfurization, chemical processing, food processing and storage as well as pharmaceutical applications to name a few. The nickel, chromium, molybdenum and copper levels of our Nickel 200 One End Threaded Nipple provide excellent general corrosion resistance.

Nickel Alloy 200 Nipple
    Nickel Alloy 200 Nipple

Restricted carbon plus columbium stabilization permits welded fabrications in these Nickel 200 Both End Threaded Nipple, which is to be used in corrosive environments, normally without post – weld heat treatment. Our Nickel 200 Concentric Swaged Nipple is a super – austenitic stainless alloy developed for maximum corrosion resistance to sulphuric acid and other aggressive environments not suitable for typical austenitic grades.

This Nickel 200 Eccentric Swaged Nipple also proves adequate resistance to nitric acid, concentrated sulphuric acid, dilute acetic acid and naphtha. Our Alloy 200 Hexagon Reducing Nipple is also stabilized with Columbium to minimize carbide precipitation during welding. Applications of these Alloy 200 One End Threaded Nipple could result in real cost savings when carefully compared to higher-cost alloys to determine if the necessary resistance is obtained in the chosen media.

Nickel 200 Nipple
Specifications : ASTM B366, ASME SB 366
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Nickel Alloy 200 Nipple Chemical Composition
Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max 0.01 max 0.25 max
Nickel 200 Nipple Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %
Equivalent Grades for Nickel 200 Nipple
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2
Nickel 200 Nipple Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel Alloy 200 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *