Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 201 Wire, which is one of the most widely used metals on the planet. Due to the naturally occurring iron content in lateritic ores of Nickel 201 Wire, the end product of most smelters working with such ores is ferro – nickel, which can be used by steel producers after silicon, carbon and phosphorus impurities are removed. Nickel 201 Coil Wire produces nickel oxide, which is then reduced using electric furnaces at temperatures between the ranges of 2480 Degree F – 2930 Degree F (1360 Degree C – 1610 Degree C) and volatilized to produce nickel metal and nickel sulphide.
Most often, Nickel 201 Wire is found in steels and metal alloys, but it is also used in the production of batteries and permanent magnets. The nickel – containing austenitic range of Nickel 201 is defined by their face – centered cubic (FCC) crystal structure, which has one atom at each corner of the cube and one in the middle of each face.
Nickel 201 Wire is primarily extracted from the nickel sulphide pentlandite, pyrrhotite, and milarite, which contain about 1 % nickel content, and the iron – containing lateritic ores limonite and garnierite, which contain about 4 % nickel content. Alloy 201 Wire is a strong, lustrous, silvery – white metal that is a staple of our daily lives.
Nickel 201 Wire Specifications |
||
| Specifications | : | ASTM B160 ASME SB160 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire, Electrode Wire, Welding Wire. |
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Nickel 201 | 0.15 max | 0.35 max | 0.35 max | 0.25 max | 0.01 max | – | 0.40 max | 99.0 min | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)