Stainless Steel 304 Bolts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Bolts And Nuts, which is an austenitic chromium nickel stainless steel. Stainless Steel 304 Hex Head Bolts is non – magnetic in the annealed condition but it becomes magnetic when cold worked. Stainless Steel 304 Hex Head Nuts is used for aircraft structural parts, architectural & automotive trim, automobile wheel covers, conveyor belts & appliances. The sizes and thickness of Stainless Steel 304 Square Bolts usually furnished to excellent specification, inclusive, in minimum wall thickness or, if specified in the order, average wall thickness.

Stainless Steel 304 Bolts Manufacturer In India | Stainless Steel 304 Bolts Manufacturer In Mumbai | Stainless Steel 304 Bolts Exporter In India | Stainless Steel 304 Bolts Exporter In Mumbai 

Stainless Steel 304 Bolts

The combination between ductility & toughness of Stainless Steel 304 Square Nuts is excellent even at low temperature, where its weldability is also good. Stainless Steel 304 U-Bolts having other diameters may be furnished, provided such fasteners comply with all other requirements of this specification. Stainless Steel 304 Lock Nuts has slightly higher carbon version than SS 314, which is further widely used in the stamping, spinning & wire forming industry.

Stainless Steel 304 Eye Bolts is used to form washer & springs, which is mainly used in parts requiring cold forming after machining. Stainless Steel 304 Eye Nuts provides excellent toughness and is frequently used for aircraft fittings, electrical switchgear components etc. Stainless Steel 304 T-Bolts offers excellent machinability, good strength & corrosion resistance.

SS 304 Bolt/Nut Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
304 Stainless Steel Bolt/Nut Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
304 0.08 max 2.0 max 0.75 max 0.045 0.030 18.0-20.0 8.0-10.5 0.10
Stainless Steel 304 Bolt/Nut Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness Rockwell B (HR B) max Hardness Brinell (HB) max
304 515 205 40 92 201
Stainless Steel 304 Bolt/Nut Physical Properties
Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100°C (J/kg.K) Electrical Resistivity

(n.m)

0-100°C 0-315°C 0-538°C at 100°C at 500°C
304 8000 193 17.2 17.8 18.4 16.2 21.5 500 720
Equivalent Grades for 304 Stainless Steel Bolt/Nut
AISI Grade Equivalent JIS Equivalent Stainless Steel Notation EN/DIN Numerical Equivalent UNS
designation
EN/DIN Symbolical Equivalent
AISI 304 SUS304 SS 304 EN 1.4301 UNS S30400 X4CrNi18-10
SS 304 Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
304 Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *