Stainless Steel 304 Tube to Male Fittings Manufacture

Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304 Tube to Male Fittings, which does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid. The austenitic structure of our Stainless Steel 304 Tube Fittings also gives this grade excellent toughness, even down to cryogenic temperatures. These Stainless Steel 304 Compression Fittings can be easily welded and processed by standard shop fabrication practices. Our Stainless Steel 304 Ferrule Tube Fittings is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value.

These Stainless Steel 304 Double Ferrule Tube Fittings performs well in fresh water service by means of low levels of chlorides (less than 100 ppm). At higher chloride levels, our SS 304 Tube Fittings is susceptible to crevice corrosion and pitting. Working temperatures of these Stainless Steel 304 Male Connector  Fittings is up to 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) and are recommended for most hot working processes.

Our SS 304 Compression Fittings contains between 16 percent chromium and 24 percent chromium and up to 35 percent nickel — as well as small amounts of carbon and manganese. The slightly higher price point of these 304 Stainless Steel Male Connector Fittings is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways.

Stainless Steel 304 Tube to Male Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

SS 304 Tube To Male Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304 0.08 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 8 – 11
Stainless Steel 304 Tube To Male Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304 Stainless Steel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10

 

SS 304 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 304 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *