Sachiya Steel International is the top most producer & wholesaler in Stainless Steel 304L Washers, which is additionally advantageous for top temperature service thanks to its sensible mechanical properties. These Stainless Steel 304L Flat Washers offers higher creep and stress rupture properties than Stainless Steel 304.
Our SS 304L Lock Washer includes a rather improved corrosion resistance over completely different alloys of stainless steel in powerfully oxidizing environments as a result of the addition of metal (niobium) and number. These Stainless Steel 304L Sealing Washer doesn’t perform well in chloride solutions, even in tiny concentrations, or in sulphuric acid.
SS 304L Split Washer carries out intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C), or for attachment below conditions that stop a post – weld temper. These Stainless Steel 304L Slot Washers can be hardened by heat treatment, solely by cold operating.
Stainless Steel 304L Machine Washer may be simply welded and processed by commonplace search fabrication practices. These SS 304L Star Washers also contains niobium for stabilization against sensitization and resultants inter – granular corrosion. Restricted SS 304L Wire Spring Washers plus columbium stabilization permits welded fabrications to be used in corrosive environments, normally without post – weld heat treatment. These SS 304L Flat Spring Washer appears to fall between both the stainless and nickel categories as it contains characteristics of both.
    Â
SS 304L Washers Specifications |
||
| Specifications | : | ASTM A 193 ASME SA 193 |
| Standard | : | DIN, ASTM, BS and all International Standards |
| Length | : | M02 to M33 |
| Size | : | 3 mm to 200 mm |
| Type | : | Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 304L | min. | – | – | – | – | – | 18.0 | – | 8.0 | – |
| max. | 0.03 | 2.0 | 1.00 | 0.045 | 0.03 | 20.0 | 12.0 | – | ||
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 304L | 485 | 170 | 40 | 92 | 201 |
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 304L | S30403 | 304S31 | 58E | 1.4306 / 1.4307 | X5CrNi18-10 | 2332 | SUS 304L |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.