Stainless Steel 317 Wire Mesh Manufacture

 

Sachiya Steel International  is one of the well-established Manufacture and Exporter of high quality Stainless Steel 317 Wire Mesh, which is used to avoid corrosion problems caused by welding. SS 317 Hexagonal Wire Mesh exhibits great resistance to chloride pitting and crevice corrosion because of high molybdenum content and nitrogen additions, and the higher nickel content ensures better resistance to stress – corrosion cracking versus the 300 series. The higher alloy content of super austenitic SS 317 Welding Wire Mesh makes them more expensive.

Stainless Steel 317 Netting Wire Mesh is used in pressure vessels but is a low – alloy carbon steel with a chromium content of 0.5 % to 9 %. Stainless Steel 317 Woven Wire Mesh is preferred where biocompatibility is required (such as body implants and piercings). Stainless Steel 317 Spring Steel Wire Mesh reduces the sensitization effect (precipitation of chromium carbides at grain boundaries) caused by the high temperatures involved in welding.

SS 317 Fencing Wire Mesh generally has better engineering properties than austenitic grades, but has reduced corrosion resistance, because of the lower chromium and nickel content. 317 Stainless Steel Wire Mesh are also usually less expensive, which can offer similar performance at lower cost and are preferred in certain applications. SS 317 Wire Mesh have a body – centered cubic crystal system and contain between 10.5 % and 27 % chromium with very little nickel, if any, but some types can contain lead.

 

SS 317 Wire mesh Specifications
Specifications	:	ASTM A 164 ASME SA 164
Standard	:	DIN, ASTM, BS and all International Standards
Length	:	30m to 100″
Width	:	1m to 48″
Type	:	Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.

 

 

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

 

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)