Stainless Steel 347H Wire Mesh

Stainless Steel 347H Wire Mesh Manufacture

 

Sachiya Steel International is one of the well-established Manufacture and Exporter of Stainless Steel 347H Wire Mesh, which cannot be hardened by heat treatment but can be strengthened by cold working. With over 11 % of chromium, SS 347H Hexagonal Wire Mesh is about 200 times more resistant to corrosion than mild steel. Stainless Steel 347H Welding Wire Mesh contain trace amounts of nickel, 12 % – 17 % chromium, less than 0.1 % carbon, along with other alloying elements, such as molybdenum, aluminum or titanium. These magnetic and heat – treatable SS 347H Netting Wire Mesh are used in knives, cutting tools, as well as dental and surgical equipment.

Our prime aim is to manufacture best quality of Stainless Steel 347H Woven Wire Mesh, along with ingots and forging ingot (alloy & non alloy) to suit the industrial need. We use fine quality of raw materials and scrap for our production of SS 347H Spring Steel Wire Mesh. Our adaptation to new technological inputs and multifaceted infra structural base would ensure quality Stainless Steel 347H Fencing Wire Mesh.

The process of manufacturing 347H Stainless Steel Wire Mesh from raw materials such as scrap and sponge iron involves many sophisticated processes. SS 347H Wire Mesh will have a structure consisting fine materials which, as the Carbon content is raised, transitions to a fully structure and on to one containing free carbide in a matrix of fine materials and even some for the highest Carbon grades.

 

SS 347H Wiremesh Specifications

Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, AISI International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

 

347H Stainless Steel Wire Mesh Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 20.00 8xC – 1.10 9.00 – 13.00 63.72 min

Stainless Steel 347H Wiremesh Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347H Stainless Steel Wiremesh
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347H 1.4961 S34709 SUS 347H – – – X6CrNiNb18-12

 

SS 347H Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

347H Steel Wiremesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *