Stainless Steel 410 Nuts Manufacturer

Stainless Steel 347H Nuts Manufacturer
April 29, 2022
Stainless Steel 446 Nuts Manufacturer
April 30, 2022

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Nuts And Bolts, which is completely ferrite in the annealed condition. Stainless Steel 410 Hex Head Bolts is a precipitation hardening martensitic stainless steel designed to have a greater toughness. Stainless Steel 410 Hex Head Nuts is used in applications requiring better corrosion resistance and transverse properties compared to other similar martensitic grades. Strength and toughness desired of Stainless Steel 410 Square Bolts can be altered by temperate range in the heat treatment process. Stainless Steel 410 Square Nuts is a low carbon, non – hardening modification of the general purpose 12 % chromium martensitic stainless steel.

Stainless Steel 410 Nuts

      Stainless Steel 410 Nuts

The low carbon and a small alloy addition in Stainless Steel 410 Eye Bolts minimize austenite formation at high temperatures which restricts the alloys ability to harden. Stainless Steel 410 Eye Nuts remain soft and ductile even when rapidly cooled from above the critical temperature. This non – hardening characteristic of Stainless Steel 410 U-Bolts helps prevent cracking when the alloy is exposed to high temperatures or welded.

The oxidation resistance of Stainless Steel 410 Lock Nuts is good, which further exhibits adequate corrosion resistance and has good oxidation resistance. Stainless Steel 410 T-Bolts resists corrosion in atmospheric conditions, fresh water, mild organic and mineral acids, alkalis and some chemicals. The chromium in Stainless Steel 410 Wing Nuts forms a passivation layer of chromium oxide when exposed to oxygen.

SS 410 Bolt/Nut Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
410 Stainless Steel Bolt/Nut Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75
Stainless Steel 410 Bolt/Nut Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201
Stainless Steel 410 Bolt/Nut Physical Properties
Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
410 7750 200 9.9 11.4 11.6 24.9 28.7 460 570
Equivalent Grades for 410 Stainless Steel Bolt/Nut
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410
SS 410 Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
410 Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote