Stainless Steel 904L Hydraulic Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 904L Hydraulic Fittings, which is not very electrically or thermally conductive and is non – magnetic. Stainless Steel 904L Hydraulic Type Fittings is a corrosion and heat resistant 12 % chromium steel, and is the most widely used of the harden able stainless steels. Heat treated Stainless Steel 904L Forged Hydraulic Fittings has mechanical properties comparable to the engineering alloy steel, coupled with the additional benefit of good corrosion resistance. 904L Stainless Steel Hydraulic Fittings is used for a variety of household and industrial applications such as screws, machinery parts, car headers, and food-handling equipment.

Stainless Steel 904L Hydraulic Fittings

904L Stainless Steel Hydraulic Type Fittings contains both chromium (usually 18 %) and nickel (usually 8 %) metals as the main non-iron constituents. 904L Stainless Steel Forged Hydraulic Fittings stains less easily than other iron-based metals, but it’s not literally stainless. SS 904L Hydraulic Fittings has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.

Grade 904L Hydraulic Fittings is also used in the architectural field for exterior accents such as water and fire features. The standard specification for carbon and high – strength low – alloy structural steel shapes, quenched and tempered Type 904L Hydraulic Fittings for structural plates intended for use in bridges. AISI 904L Hydraulic Fittings is highly resistant to atmospheric corrosion, where maximum corrosion resistance is obtained by hardening and polishing.

SS 904L Hydraulic Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 904L Hydraulic Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
SS 904L 0.2 max 1.5 max 0.75 max 0.04 max 0.030 max 23 – 30 0.50 max 0.10 – 0.25 Balance
SS 904L Hydraulic Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20 %
Equivalent Grades for 904L Stainless Steel Hydraulic Tube Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 904L 1.4539 N08904
SS 904L Hydraulic Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 904L Hydraulic Tube Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *