Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium. Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application. Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability. This film makes the commercially pure Titanium Grade 2 Netting Wire Mesh which are resistant to most oxidizing, neutral and inhibited reducing as well as mildly reducing environments.
Titanium Grade 2 Woven Wire Mesh is often used in Aerospace industry, Chemical and marine applications, Electroplating industry, and Medical industry. Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants. For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight.
Ti Alloy Gr. 2 Wire Mesh is the most commonly used Titanium worldwide and is the most commonly used alloy in the oilfield. Ti Alloy Gr. 2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die. Ti Alloy Gr. 2 Welding Wire Mesh is used in a variety of industries such as chemical, marine, medical, recreational, and aerospace.
Titanium Gr 2 Wire mesh Specifications |
||
| Specifications | : | ASTM B348 / ASME SB348 |
| Standard | : | ASTM, ASME |
| Size | : | Dia6.0-200mm x Length1000-6000mm |
| Types | : | Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc. |
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max | – | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Grade2 | 3.7035 | R50400 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)