Titanium Grade 2 Hydraulic Fittings Manufacturer

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Hydraulic Fittings, which has numerous applications in the medical industry. Titanium Grade 2 Hydraulic Fittings is stronger and similar in ductility and only slightly less formable – but it possesses higher mechanicals than its predecessors. Stress relieving of Titanium Grade 2 Forged Hydraulic Fittings should be performed by heating to a temperature between 900 Degree F and 1100 Degree F followed by either forced air or slow cooling. Grade 2 Titanium Hydraulic Tube Fittings is also known as near-alpha alloys that contain small amount of ductile beta – phase.

Titanium Grade 2 Hydraulic Fittings

Besides alpha – phase stabilizers, near-alpha alloys such as Grade 2 Titanium Forged Hydraulic Fittings are alloyed with 1 % – 2 % of beta phase stabilizers. In Ti Alloy Gr. 2 Hydraulic Fittings, an oxidized layer forms as well that must be chemically or mechanically removed after work. Ti Alloy Gr. 2 Hydraulic Tube Fittings can easily be hot worked, where this oxidized layer forms spontaneously and immediately upon exposure to oxygen.

Ti Alloy Gr. 2 Forged Hydraulic Fittings has excellent welding and fabrication properties and is extremely resistant to corrosion especially from reducing acids. If damaged, Ti Grade 2 Hydraulic Fittings re – forms readily as long as there is some source of oxygen (air or moisture) in the environment. The parts built with Grade 2 Titanium Alloy Hydraulic Fittings have chemical composition corresponding to ASTM standard.

Titanium Gr.2 Hydraulic Fittings Specifications
Standards : ASTM B381 / ASME SB381
Size Range : 1/16″OD to 2″OD, 2mm OD to 50mm OD
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
End : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting
Titanium Gr.2 Hydraulic Fittings Chemical Composition
Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max
Titanium Alloy Grade 2 Hydraulic Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %
Equivalent Grades for Ti Alloy Gr2 Hydraulic Tube Fittings
Titanium Gr. 2 3.7035 R50400
Titanium Alloy Grade 2 Hydraulic Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Titanium Gr.2 Hydraulic Tube Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *