Inconel Alloy 600 Bolts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel Alloy 600 Bolts And Nuts, which has good resistance to chloride – ion stress corrosion cracking. Inconel 600 Hex Head Bolts is resistant to chloride ion stress corrosion cracking, corrosion by pure water and caustic corrosion. Inconel 600 Hex Head Nuts is subject to stress corrosion cracking in hot and concentrated caustic alkalis. Inconel 600 Square Bolts resists steam and mixtures of air, steam, and carbon dioxide. Inconel 600 Square Nuts exhibits high levels of resistance to exhaust gases, stress and salt water, and most organic acids and compounds.

Inconel Alloy 600 Bolts
   Inconel Alloy 600 Bolts

The high chromium content of Inconel 600 U-Bolts raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions. Hot working in Inconel 600 Lock Bolts should be performed between 1600 Degree F and 2250 Degree F, avoiding any work between 1200 Degree F and 1600 Degree F as the ductility decreases in this temperature range.

Inconel 600 Eye Bolts is not precipitation harden able and is hardened and strengthened only by cold work. Inconel 600 Eye Nuts makes resistant to corrosion by a number of organic and inorganic compounds. Inconel 600 T-Bolts is a standard engineering material that has great resistance to heat and corrosion. Inconel 600 Wing Nuts is a solid solution strengthened alloy used for corrosion and high temperature resistance up to 2000 Degrees F.

Alloy 600 Bolt/Nut Specifications
Specifications : ASTM B 166 ASME SB 166
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
600 Inconel Alloy Bolt/Nut Chemical Composition
Grade C Mn Si Fe S Cr Cu Ni
600 min. 6.0 14.0 72.0
max. 0.15 1.0 0.5 10.0 0.015 17.0 0.5
Inconel Alloy 600 Bolt/Nut Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
600 Psi – 95,000 , MPa -655 Psi – 45,000 , MPa – 310 40
Equivalent Grades for 600 Inconel Bolt/Nut
Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 600 N06600 NA 13 NiCr15Fe 2.4816 NC15FE11M МНЖМц 28-2,5-1,5 NCF 600
Alloy 600 Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
600 Inconel Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *