Monel 400 Tube to Female Pipes

Monel 400 Tube to Female Pipes Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel 400 Tube to Female Pipes, which has good ductility and thermal conductivity. A low corrosion rate of Monel 400 Tube Fittings in rapidly flowing brackish or seawater is combined with excellent resistance to stress – corrosion cracking in most freshwaters. Resistance of Monel 400 Compression Fittings to a variety of corrosive conditions led to its wide use in marine applications and other non – oxidizing chloride solutions. Monel 400 Female Connector Fittings is a Nickel – Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions.

Monel 400 Tube to Female Pipes
Monel 400 Tube to Female Pipes

The commercially available pure nickel, as Monel 400 Ferrule Tube Fittings, exhibits excellent corrosion resistance in reduced environments. The characteristics of Monel 400 Double Ferrule Tube Fittings include corrosion resistance in an extensive range of marine and chemical environments. Monel 400 Compression Tube Fittings is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated.

As would be expected from its high copper content, Alloy 400 Female Connector Fittings is rapidly attacked by nitric acid and ammonia systems. The product differentiation is based on the premier finish of Alloy 400 Ferrule Tube Fittings with minimum burr at the edge. The ends for perfect welding and fabrication of Alloy 400 Double Ferrule Tube Fittings are used in mega projects in oil and gas industry for long life of the product.

Monel 400 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 4000 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
400 Monel Alloy Tube to Female Pipes Fitting Chemical Composition
Monel 400 Ni C Al Mn Si Fe Cu S Co Cr
63.0 min 0.3 max 0.50 max 2.0 max 0.5 max 1.0 – 2.5 28.0 – 34.0 0.02 max
Monel Alloy 400 Tube to Female Pipes Fitting Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 35,000 , MPa – 240 Psi – 80,000 , MPa – 550 40 %
Equivalent Grades for 400 Monel Tube to Female Pipes Fitting
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel 400 N04400 2.4360 NU-30M NiCu30Fe NW 4400 NA 13 МНЖМц 28-2,5-1,5
Monel Alloy 400 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Monel 400 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *