Monel Alloy K500 Angle Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Angle And Other Products , which combines excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication. Applications of Monel K500 Angle are limited to a maximum temperature of 1000 Degree F per ASME. Monel K500 C-Channel is often chosen to solve SCC problems, which may occur with 316L stainless. Monel K500 H-Beam was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling sulphuric acid. Monel K500 I-Beam also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.

Monel K500 T-Beam can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps. Alloy K500 Angle has minimal carbide precipitation during welding and excellent mechanical properties and fabricability is excellent design features. Resistance to sulphuric acid is particularly exceptional but Alloy K500 C-Channel shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.

Monel Alloy K500 Angle
Monel Alloy K500 Angle

With good general corrosion properties, Alloy K500 H-Beam usage has expanded in chemical, petrochemical and power generation plants. Our expertise in global logistics enables us to source Alloy K500 I-Beam from anywhere in the world in a matter of days and provide fast shipping solutions to all our customers, whichever country they are in. Alloy K500 T-Beam has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.

Monel K500 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B865 / ASME B865
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Monel K500 Angle
: 5mm to 9mm
Monel K500 Channel
: 40mm*20mm~300mm*300mm
Monel K500 Beam : 3″ thru 12.31″
Monel K500 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
K500 Monel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Cu Fe Ni S
Monel K500 0.25 max 1.50 max 0.5 max 27.0-33.0 0.5 – 2 63.0 min 0.010 max
Monel Alloy K500 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 1,60,000 , MPa – 1100 Psi – 1,15000 , MPa –790 20%
Equivalent Grades for K500 Monel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS JIS GOST BS AFNOR EN
Monel K500 2.4375 N05500
Monel K500 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
K500 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Leave a Comment

Your email address will not be published. Required fields are marked *