Sachiya Steel International is a Leading manufacturer and exporter of Titanium Gr 2 Wire, which has a detrimental effect on ductility and its content kept as low as possible. In the majority of these and other engineering applications, Titanium Grade 2 Wire has replaced heavier, less serviceable or less cost effective materials. Titanium Grade 2 Coil Wire is the best among commercially pure titanium grades, where it is the softest and most ductile compared to grades. Typical applications for Titanium Grade 2 Wire include chemical process, petroleum refining, biomedical as well as heat exchangers in an array of different applications.
Titanium Grade 2 are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures. Titanium Grade 2 Wire is used commonly in applications that require welding because of its strong weldability properties. Ti Gr. 2 Filler Wire is higher in strength than CP Grade 1, but lower in strength than CP Grade 3 and CP Grade 4. Ti Gr. 2 Electrode is used in aviation, aerospace, military, chemical, petrochemical industry, in the medical field, jewelry, calibration of measurement instruments, piercing purposes.
Ti Gr. 2 Welding Electrode is also used in Architecture, Automotive Desalination, Dimensional Stable Anodes, Medical, Marine, and Processing & Chlorate Manufacturing. As a single – phase material, the properties of Ti Gr. 2 Welding Wire are controlled by chemistry (iron and interstitial impurity elements) and grain size.
Titanium Gr.2 Wire Specifications |
||
| Specifications | : | ASTM B863 ASME SB863 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire, Electrode Wire, Welding Wire. |
| Grade | Ti | C | Fe | H | N | O |
| Titanium Grade 2 | Â 99.2 min | Â 0.1 max | 0.3 max | Â 0.015 max | 0.3 max | Â 0.025 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|  4.5 g/cm3 |  1665 °C (3030 °F) |  Psi – 49900 , MPa – 344 |  Psi – 39900 , MPa – 275 |  20% |
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Grade 2 | 3.7035 | R50400 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)