Sachiya Steel International is a Leading Manufacture And Exporter Of Cupro Nickel 90 Wire. Some of the primary uses for Cupro Nickel 90 Wire include condensers as well as exchanger shells. Cupro Nickel 90 / 10 Wires has 2 % to 30 % nickel, high oxidation resistance and stress corrosion cracking resistance. Some common applications for Cupro Nickel 90 / 10 Coil Wires include: valves, pump components, fittings, flanges and various other marine hardware components. The inclusion of controlled quantities of iron and manganese also give Cupro Nickel 90 / 10 Wire an extraordinary resistance to general corrosion and stress cracking, as well as to erosion and impingement due to turbulent water containing air bubbles and silt flowing at high velocities.
Cupro Nickel 90 / 10 Coiled Electrode is highly resistant to corrosion in seawater because its electrode potential is adjusted to be neutral with regard to seawater. Cu-Ni 90 / 10 Wire is not recommended for usage in heavily polluted water containing sewage and industrial wastes. Cu-Ni 90 / 10 Wire with additions of manganese is important in electrical engineering.
Additions of iron significantly improve the resistance of Cu-Ni 90 / 10 Coil Wire to erosion corrosion in flowing seawater and other aggressive waters. Cu-Ni 90 / 10 Wire are a copper – based alloy developed as a cost – effective substitute for Cu-Ni 70 / 30 Wire. Cu-Ni 90 / 10 Wire is a strong, ductile material exhibiting good corrosion resistance.
Cupro Nickel 90/10 Wire Specifications |
||
| Specifications | : | ASTM B206 / ASME SB206 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Cu-Ni 90/10 | Cu | Pb | Mn | Fe | Zn | Ni |
| 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
| STANDARD | UNS | WERKSTOFF NR. |
| Cupro Nickel 90/10 | C70600 | 2.0872 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)