SMO 254 Tubes Manufacturer

AISI 4130 Tubes Manufacturer
January 14, 2022
Aluminium Tubes Manufacturer
January 15, 2022

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality SMO 254 Tubes which are highly alloyed and have a corrosion resistance comparable to high performance austenitic steel. These SMO 254 Seamless Tubes does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain – proof in low – oxygen, high – salinity, or poor air – circulation environments. The basic idea of these SMO 254 Welded Tubes is to produce a chemical composition that leads to an approximately equal mixture of ferrite and austenite.

SMO 254 Tubes

          SMO 254 Tubes

There are various sizes, shapes and surface finishes of SMO 254 EFW Tube to suit the environment of the alloy that must endure. These SMO 254 ERW Tube is used where both the properties of steel and corrosion resistance are required. By lowering total material weight, you also lower transportation and assembly costs, reducing environmental impacts even further – making SMO 254 Round Tubes a genuine material of the future.

The high chromium and molybdenum content also gives these SMO 254 Square Tubes a high resistance to acids that could cause pitting. SMO 254 Rectangular Tubes is 22 % chromium (austenitic / ferrite) steel with moderate / good strength and good general corrosion/ stress corrosion cracking resistance. These SMO 254 Electropolish Tubes has high performance, high strength, with 25 % chromium (austenitic / ferrite) steel strands and wire ropes with outstanding corrosion resistance.

SMO 254 Seamless Tube Specifications
Specifications : ASTM A 269 ASME SA 269 / ASTM A 249 ASME SA 249
Dimensions : ASTM, ASME and API
Tube Size : 3/4″ – 12″
Specialized in : Large Diameter Size
Thickness : 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc.
Type : Seamless / ERW / Welded / Fabricated
Form : Round, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded
SMO 254 Tubes Chemical Composition
SMO 254 Ni C Mo Mn Si Fe Cu S P Cr
17.5 – 18.5
0.02 max 6 – 6.5
1 max 0.8 max 0.5 – 1 0.01 max 0.03 max 19.5 – 20.5
SMO 254 Tube Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.0 g/cm3 1320-1390 ℃ 300 650 35 %
Equivalent Grades for 254 SMO Tubing
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS SIS GOST
SMO 254 S31254 1.4547 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7 2378
SMO 254 Seamless / Welded Tubes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
254 SMO Tubes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote