Titanium Gr 5 Tube to Female Pipes Manufacturer

Titanium Gr 2 Tube to Female Pipes Manufacturer
November 15, 2021
Cupro Nickel 70 Tube to Female Pipes Manufacturer
November 16, 2021
Titanium Gr 5 Tube to Female Pipes

Titanium Gr 5 Tube to Female Pipes

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Tube to Female Pipes, which has improved ductility and fracture toughness with some reduction in mechanical strength. Titanium Grade 5 Tube Fittings and its related alloys resist a wide range of acid conditions being highly resistant to oxidizing acids, possessing useful resistance to reducing acids and offering good resistance to most organic acids at lower concentrations and temperatures. Hot Isotactic Pressure of Titanium Grade 5 Compression Fittings applied in an inert atmosphere (argon) to eliminate micro – porosity and shortage of material inside the casting.

Titanium Gr 5 Tube to Female Pipes

Titanium Gr 5 Tube to Female Pipes

Titanium Grade 5 Female Connector Fittings is an alloyed titanium product containing 6 % Aluminum and 4 % Vanadium; is a medium strength product. The usability makes Titanium Grade 5 Ferrule Fittings the best alloy for use in several industries, like the aerospace, medical, marine and chemical processing industries. Besides alpha – phase stabilizers, Titanium Grade 5 Double Ferrule Fittings are alloyed with 1 % – 2 % of beta phase stabilizers such as molybdenum, silicon or vanadium.

Ti Gr. 5 Tube Fittings are the smallest group of titanium alloys and have good hardenability and can be heat treated to high yield strengths. Ti Gr. 5 Compression Fittings is resistant to general corrosion but may be quickly attacked by environments that cause breakdown of the protective oxide layer including hydrofluoric (HF), hydrochloric (HCl), sulfuric and phosphoric acids.

Titanium Grade 5 Tube to Female Pipes Specifications
Specifications : ASTM B381 ASME SB 381
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 3000 – 4000 PSI
Applicable Temperature
: 150-400 C
Type
: Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Gr 5 Titanium Alloy Tube to Female Pipes Fitting Chemical Composition
Titanium Gr 5 C Ti N Fe H O V Al
0.10 max 90 min 0.05 max 0.40 max 0.015 max 0.20 max 3.5-4.5 5.5-6.75 max
Titanium Alloy Gr 5 Tube to Female Pipes Fitting Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 128000 , MPa – 880 Psi – 138000 , MPa – 950 14 %
Equivalent Grades for Gr 5 Titanium Tube to Female Pipes Fitting
STANDARD UNS WERKSTOFF NR.
Titanium Gr 5 R56400 3.7165
 Titanium Alloy Gr.5 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Titanium Gr 5 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Get Quote