Incoloy 800 Wire Mesh

Incoloy 800 Wire Mesh Manufacture

Sachiya Steel International provides a higher quality collection of Incoloy 800 Wire Mesh for valued clienteles. This Incoloy 800 Wire Mesh is used for the similar creep resistant uses, but the mutual effects of thermal and mechanical processing of the alloy allow superior design pressures to be combined than are allowable for the conventional alloy. Incoloy 800H Hexagonal Wire Mesh is an iron – nickel – chromium alloy and is part of the 800 series family of alloy. This Incoloy 800HT Welding Wire Mesh is a mixture of chromium and nickel alloy and is organized composition imitative of INCOLOY alloy products.

Incoloy 800 Netting Wire Mesh has outstanding resistance to oxidation and tensile strength plus carburization characteristics. Meanwhile, this Incoloy 800H Woven Wire Mesh is also being offered in different sizes and shapes to our customers. Incoloy 800HT Spring Steel Wire Mesh offers superior corrosion resistance in oxidizing corrosive environments such as nitric acid or nitric acid – sulfuric acid. This Alloy 800 Fencing Wire Mesh has High temperature strength and High creep rupture strength.

We knew the importance of maintaining the aluminum and titanium contents in the upper portion of the specified material range of Alloy 800 Wire Mesh, which resulted in higher creep and stress rupture properties. Typical applications for these Alloy 800H Wires include ethylene pyrolysis, cracking furnaces for vinyl chloride, hydrocarbon cracking, diphenol and acetic acid.

 

Incoloy 800 / 800H / 800HT Wiremesh Specifications
Specifications : ASTM / ASME B 408 / SB 408
Standard : ASTM / ASME
Size : 15NB to 150NB In
Length : UUPTO 1 METERS
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

 

800 / 800H / 800HT Incoloy Wire Mesh Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Alloy 800 / 800H / 800HT Wiremesh Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800 / 800H / 800HT Incoloy Wiremesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

 

Alloy 800 / 800H / 800HT Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

 

Incoloy 800 / 800H / 800HT Wiremesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Leave a Comment

Your email address will not be published. Required fields are marked *